Ricko1966's latest activity
-
RThat's a good thing. The two systems are so vastly different that most electricians don't know chit about low voltage. I see this on a...
-
RRicko1966 replied to the thread Fuse question (what is this for? Empty on a schematic).What color wire is going to the choke? Check it against a schematic. This truck was a 6 and p.o. swapped to V8 who knows what wires...
-
RI have Sanderson's on my bbc and I installed them exactly as they suggested with the Ultra Black only and I haven't had any leaks at the...
-
RRicko1966 replied to the thread Fuel neck filler hose doesn't fit with new tank.Can the whole bracket with straps be moved back on the frame to make your filler work if you re drill the frame to mount your tank where...
-
RI removed my saddle tanks and installed a 31 gallon blazer EFI tank in the back of mine. Like Rob said, you need to be really careful...
-
RRicko1966 replied to the thread Fuse question (what is this for? Empty on a schematic).Ground it see if the gauge pegs.
-
RRicko1966 replied to the thread New clapped out ‘87 350.Noooooooo!!!!!! I'm sorry to tell you this 500.00 might! get your crank turned,rod big ends,checked,a 929 cam clone,rings,brgs,solvent...
-
RRicko1966 replied to the thread Fuse question (what is this for? Empty on a schematic).What wire did you ground out? Anyways don't connect it to sender,first check resistance to ground on what you suspect is the correct...
-
RRicko1966 reacted to Bextreme04's post in the thread Fuse question (what is this for? Empty on a schematic) with
Like.
Those open spots are places to pick off power. Some of them are constant power. Some are ignition switched, and some of them are... -
RRicko1966 replied to the thread New clapped out ‘87 350.Well,cool. How fast do you want to spend?Some aluminum heads from summit and more cam would go a long way.
-
RRicko1966 replied to the thread Cheap media blaster or pay a local shop to media blast wheels.Post number 2 I said that's what I'd do because that is what I do it's not an I think this will work. It is an it does work for me. Try...
-
RRicko1966 reacted to Grit dog's post in the thread Cheap media blaster or pay a local shop to media blast wheels with Like.
If they won’t seal after cleaning them up with a wire wheel, they’re pitted and will never seal. Blasting them is a waste of time and...
-
RRicko1966 replied to the thread New clapped out ‘87 350.This is stock tbi heads,a mild cam,exhaust,underdrive pulleys,and an electric fan. Pretty much a stock 350 tbi with bolt ons. More cam...
-
-
RRicko1966 replied to the thread New clapped out ‘87 350.250 hp that can be done real cheap,reliable, and still good on gas. Headers and a mild cam will get you there.
-
RRicko1966 replied to the thread Cheap media blaster or pay a local shop to media blast wheels.In my opinion media blasting isn't going to fix the seal problem. I'd use a 4 inch grinder with a sanding wheel and go all the way...
