-
-
RRaoul Ross replied to the thread Help Please - Fighting new Gremlins.In that picture, what's that wire hanging right in front of that round hole? Is that a broken connector or is it connected to something...
-
RRaoul Ross reacted to bucket's post in the thread What is this 2 prong Plug above the oil filter? with
Like.
Unless the part is bad, that would be unexciting. It needs to be plugged in AND engine running for a good a thorough report, lol. -
RRaoul Ross replied to the thread 1986 K10 Cutting off When Put in Gear.Ding! Drunk Posting agin...heh
-
RRaoul Ross reacted to Ricko1966's post in the thread 1986 K10 Cutting off When Put in Gear with Like.
A neutral safety switch will not turn off a running car. A neutral safety switch stops the starter from engaging
-
RRaoul Ross replied to the thread Proportioning Valve and Bleeding.Inline Tube It was very reasonable and appeared well built. The PR100 is the P/N for front disk/rear drum and PR101 for Disk/Disk...
-
RRespectfully, vacuuming all the fluid out of the MC reservior and then refilling (before pumping the brakes) is not an issue and will...
-
RRaoul Ross replied to the thread 1986 K10 Cutting off When Put in Gear.Sounds like the Neutral Safety Switch. What happens if you bypass it?
-
RRaoul Ross replied to the thread Proportioning Valve and Bleeding.Replaced that proportioning valve and bought a fancy vacuum bleeder, which worked quite well except for one thing. As it pulls the fluid...
-
-
RRaoul Ross replied to the thread Odd Cooling System issue.The first time I changed a thermostat was on my first car, a '60 Bel Air 283. Did 2 things wrong... knocked the thermostat off-center...
-
-
RRaoul Ross replied to the thread Odd Cooling System issue.Brand new NAPA 195 thermostat and yea, it does sound like it opens early or doesn't close all the way. No rear seat heater or if there...
-
RRaoul Ross replied to the thread Odd Cooling System issue.So, the problem continues! Replaced the coolant flow 'valve' on the intake but it still won't heat up. Water flow from the heater core...
-
-
RRaoul Ross replied to the thread Proportioning Valve and Bleeding.Ordered the 'Tool' at Amazon, Thanx guys! I will try pressure bleeding first and then do the pedal pumping thing if I'm not satisfied.
-
RProportioning valve bleeder tool. Amazon 7 bucks
-
RRaoul Ross replied to the thread Proportioning Valve and Bleeding.I've kinda looked around for that tool but not finding it... what's it called? Gotta P/N or manufacturer?
-
RRaoul Ross replied to the thread Odd Cooling System issue.Ha, an LS would sure make it move all that weight easier! Got that Heater Hose Flow Control Valve today from Rockauto and there...
-
-
-
Loading…
-
Loading…
