Recent content by m1000snopro

  1. m1000snopro

    Running rough when the engine warms up.

    i actually had an ICM go out about 3 months ago and i replaced that. but thank you for the idea and i place to check. i will look into timing, it has been quite awhile since i have checked it.
  2. m1000snopro

    Running rough when the engine warms up.

    i will go grab one and rule that out cause i am not sure. thanks man
  3. m1000snopro

    Running rough when the engine warms up.

    yes TBI motor, when we hooked the scanner to it was reading 185° the second time it was 187°.
  4. m1000snopro

    Running rough when the engine warms up.

    Hey guys I have been trying to figure out the problem, when i start the truck and drive it, it runs great. once it gets up to temp it start running rough and hesitant. i don't think this has much to do with it but recently the temp gauge just started climbing all the way to the max hot side. I...
  5. m1000snopro

    Getting hot and cool

    thanks guys I will definitely look into those things. giving me a good direction to go to
  6. m1000snopro

    Getting hot and cool

    hey guys so I have been dealing with this issue for a little while now and I can not find the problem, when it warms up and I began to drive it just slowly keeps warming till it pegs the gauge out then will cool just a little, warm back up till it pegs again then rapidly cools to normal (like...
  7. m1000snopro

    Dealer Engraved rear bumper.

    looks really good. curious about the mounting as well
  8. m1000snopro

    having a problem need advise

    I have an 1987 v10 and all of a sudden while i was driving down yhe road it started to pop,pop,pop and kind of like hesitate. If you get on it, it gets a little worse til it down shifts then runs good. If i run down the road at 65 its all good til i hit a slope or load on the engine and then it...
  9. m1000snopro

    fuel issue

    thanks for the reply, I thought it was the selector valve i had a shop change it and when i picked it up it still was doing it, it was still pumping it, but it seemed like the return line was directed into the the wrong cause it was leaking now nit pumping
  10. m1000snopro

    charcoal cannister??

    Hey guys I was wondering if I could get some info on what the canister does for vacuum on the TBI and fuel system I know very little about it thanks fellas
  11. m1000snopro

    fuel issue

    does anyone know what could cause that
  12. m1000snopro

    fuel issue

    hey guys i went out on a little ride in the mountains and got out while the truck was still idling and heard and dripping noise and so i walked around the truck to investigate and the passenger fuel tank was spraying gas out, around and through the cap. i was running on the drivers side so i...
  13. m1000snopro

    front hitch mount

    perfect! that's what I was looking for thank you, looks like I got my project set for next week
  14. m1000snopro

    front hitch mount

    just so im 100% clear it is just mounted on that cross bar right there? i have that same bar i was wondering if it was strong enough but if you have it mounted there only and pulling from a ditch i would think it is strong enough
  15. m1000snopro

    front hitch mount

    it really doesnt have to be behind the plate i just thought it would be cool to keep the clean front end look and then be there when needed. i think im going to get some square tubing and try and bolt it in between the frame and weld on a reciever
See more

Latest posts

Forum statistics

Threads
42,056
Posts
908,178
Members
33,538
Latest member
Chuchito
Top