Kilian's latest activity
-
KLooking for a skid plate for the "wavy" style transmission support crossmember. I believe they are from 87-91. See picture.
-
-
KHello folks, can someone describe the best way to install new OEM rubber bushings into the stabilizer bar ends for a 4x4? I've called...
-
-
KAre these clips or similar available? They're used for rear lighting harness on inside of my 85 k10 frame. Thanks!
-
-
KLooking for factory in-bed spare tire carrier for fleetside truck. PN 325482. Item 3 in the picture below.
-
-
KIs the rubber/metal bushing that attaches the rear spring shackle to the frame support replaceable? It appears to be a smaller size than...
-
KKilian replied to the thread Ring and Pinion Numbers Mystery.I would agree, can't see any evidence of wear. Just curious on the numbers. Thanks
-
KKilian replied to the thread Ring and Pinion Numbers Mystery.Not from manufacturer...meaning someone has installed them? They were purported to be NOS. Hmmm.
-
KLooking for help interpreting numbers on a Motive Gear gm10.5-373 gearset. I'm wondering what the numbers that are hand added mean...
-
-
KKilian replied to the thread Leaf Spring Plastic Pieces.Thanks...do most people leave them out or just reuse the old ones?
-
KThis might be a dumb question but I assume there's a point where a ring gear and pinion set is too worn? I'm swapping in a used set of...
-
KIs there a source for the plastic pieces that go between leaf spring assemblies and the axle/mounting bracket? I've circled the items in...
-
-
KI am in the process of swapping in 13 inch JB7 rear brakes onto a 14 bolt ff and found that the 1987 parts truck from which I'm getting...
-
KWorking my way through rebuilding a corporate 10-bolt front axle and now installing new brake rotors (reusing original hubs). What's the...
