G
Gliderider
Latest activity Postings About
-
-
GGliderider replied to the thread Potential wiring problem.I have considered the temp sensor being bad. This is actually the second new one I’ve bought and neither has worked. I think I’m better...
-
GGliderider replied to the thread Potential wiring problem.Completely replacing the wiring harness would be my preference, as it seems I’m constantly chasing faulty wiring. On top of dealing with...
-
GGliderider replied to the thread Potential wiring problem.Yes it does
-
GGliderider replied to the thread Potential wiring problem.I’m in the process of essentially checking connections on everything. So far I’ve found one broken vacuum line, I found that when I...
-
-
GGliderider replied to the thread Potential wiring problem.It is worth considering. I’ve actually been having a problem with the temp gauge and sensor for several months. My sensor quit working...
-
GGliderider replied to the thread Potential wiring problem.SquareRoot , I didn’t phrase it correctly. I know the temp gauge has nothing to do with the motor shutting off, it’s just that those are...
-
GGliderider replied to the thread Potential wiring problem.Have to keep in mind that it still has the original wiring, and after 41 years some of it is kind of sketchy. I can’t afford a new...
-
GGliderider replied to the thread Potential wiring problem.Yeah that was a poor choice of words on my part. I was just trying to figure out what would cause the motor to quit and the temp gauge...
-
GGliderider replied to the thread Potential wiring problem.I followed the wire all the way to the back of the motor where it goes into a sleeve, the sleeve comes back across the firewall behind...
-
GGliderider replied to the thread Potential wiring problem.I’ll keep looking but I really need to be able to drive this truck, and it absolutely will not start or run if it thinks it’s...
-
GGliderider replied to the thread Potential wiring problem.I have found some chewed insulation on the inside of the firewall but not on any of the wires. The previous owner had the motor rebuilt...
-
GGliderider replied to the thread Potential wiring problem.Have not had the gauge cluster out since I’ve owned this truck. I did have a problem a while back where the wire from the sensor had...
-
GHello folks. I’m currently having an issue where my coolant temp gauge is being “told” that the engine is overheating on my ‘83 C10. As...
-
-
Loading…
-
Loading…
