BlazerBill's latest activity
-
BBlazerBill reacted to idahovette's post in the thread Help with difficult problem!!! ‘83 K5/4” lift/NP208 mounting height with incorrect homemade spacers vs correct spacers??? with
Like.
Don't think I've seen 1/2 inch bolt for a crossmember??? 3/8 maybe 7/16?? -
BBlazerBill replied to the thread Help with difficult problem!!! ‘83 K5/4” lift/NP208 mounting height with incorrect homemade spacers vs correct spacers???.Okay, the engine and trans are not yet installed. I stumbled across this issue when trial fitting the crossmember and adapter with the...
-
-
BBlazerBill replied to the thread Help with difficult problem!!! ‘83 K5/4” lift/NP208 mounting height with incorrect homemade spacers vs correct spacers???.Thanks, if I turn the crossmember around more bolt holes are off. When positioned when one hole is off, it is off about a 1/4”. The bolt...
-
BBlazerBill posted the thread Help with difficult problem!!! ‘83 K5/4” lift/NP208 mounting height with incorrect homemade spacers vs correct spacers??? in Transfer Case.Hello everyone! I have several unusual problems, not just mentally, but also with my ‘83 K5 that I’ve been restoring and am ready to...
-
-
BBlazerBill replied to the thread What Sending units oil and water temp needed for guage cluster to work like factory in k10 454 swap I will buying all the components new thank you.I called Summit Racing to have them confirm the PN’s of the OEM style oil press sender (that mounts close to the distributor) and OEM...
-
-
BI feel bad for folks who have to live by Cali rules.
-
BI’d look elsewhere for the cause of your universal “ethanol” problem. There are plenty of reasons that pure gasoline is better in many...
-
BBlazerBill reacted to hey mister's post in the thread Freak Injury Upon Another Freak Injury To Hand Requiring Emergency Surgery (Tool Safety) with Like.
In a machine shop I worked with a guy who shared a horror story. He was supervisor and off in a corner of the shop, a mold maker was...
-
BBlazerBill reacted to PrairieDrifter's post in the thread Freak Injury Upon Another Freak Injury To Hand Requiring Emergency Surgery (Tool Safety) with Like.
I try to use cutting discs only on my cordless grinder. The plug in ones are SKETCH, so much torque, and they don't shut down as fast...
-
BBlazerBill reacted to BRetty's post in the thread Freak Injury Upon Another Freak Injury To Hand Requiring Emergency Surgery (Tool Safety) with Like.
For many years, Carhartt ran a print ad with a picture of one of their welding jackets, with the left arm and upper chest completely...
-
BBlazerBill reacted to BRetty's post in the thread Freak Injury Upon Another Freak Injury To Hand Requiring Emergency Surgery (Tool Safety) with Like.
Yikes! A few years ago at our shop, the boss was using wire wheels to "distress" some planks (we build scenery for...
-
BBlazerBill reacted to waterpirate's post in the thread Freak Injury Upon Another Freak Injury To Hand Requiring Emergency Surgery (Tool Safety) with Like.
Saw a video on u tube the other day of a guy working on a boat build with the skil saw blade in his grinder. I cringed and he said what...
-
BBlazerBill reacted to Ricko1966's post in the thread Freak Injury Upon Another Freak Injury To Hand Requiring Emergency Surgery (Tool Safety) with Like.
I can't put up a like or any emoji all I can do is cringe and shake my head. Thinking poor man
-
BBlazerBill reacted to mtbadbob's post in the thread Freak Injury Upon Another Freak Injury To Hand Requiring Emergency Surgery (Tool Safety) with Like.
I know a guy, a retired Stone Mason in fact. He built a cabin in the mountains and thought it was a good idea to cut out his window...
-
BBlazerBill reacted to timbritton's post in the thread 700R4 Trans Cooling Lines options/recommendations? with Like.
I bent my own lines from steel coated lines. Patience and try using old ones as a pattern.
