-
-
Bbbusse reacted to 75gmck25's post in the thread Cleaned the interior - 1973 K10 farm truck with
Like.
With the glove compartment door removed you can also reach the top of the plenum and check the adjustment of the heat blend door. You... -
BThat's a mighty fine looking interior, especially the seat!
-
Bbbusse replied to the thread Cleaned the interior - 1973 K10 farm truck.I’ll do that soon. Definitely curious. The heater controls do work but are finicky/touchy. The vacuum line in the engine bay was...
-
Bbbusse reacted to 75gmck25's post in the thread Cleaned the interior - 1973 K10 farm truck with Like.
Now for some more quick exploration. Remove the 5 screws on the glove box hinge and slip the glove box out so you can seen the heater...
-
BExcellent! I used a dashmat to cover the crack in my pad. The seat is fine, I just like the Mexican blanket.
-
Bbbusse reacted to idahovette's post in the thread Cleaned the interior - 1973 K10 farm truck with Like.
Looks GOOD!!!!!:cool:
-
BTask for the day. Clean out the interior of the 1973 K10 revival. I have had the truck for a year almost exactly after reviving it from...
-
-
Bbbusse replied to the thread New wheels/tires - 73 K10 w/2” lift.Just to be clear, I know a lot of people reference factory rally wheels. I of course don’t have them, what size are they? For whatever...
-
BI actually am a little embarrassed about doing that but THE SAME question gets asked and a picture tells the right answer. I have been...
-
BRedfish, you never resist the opportunity to show us that lovely GMC. I'm gonna start a counter for how many times I see that most fine...
-
B@bbusse That will work just fine. Here is mine with a Skyjacker 2" softride and 33x12.50s on the factory rally wheels.
-
BMine are 32x10.5x16. Spokes rock
-
BAs for the tires, I ordered tires through Wheel Works and was told it was okay to try and if I wasn’t pleased they would be happy to...
-
BWagon wheels always looked good on these rigs and that setup should work just fine. Nice they come in correct bolt pattern without...
-
BHello everyone. I am new to this forum, any forum for that matter. I joined this forum because I am starting the rebuild process on my...
-
-
Loading…
-
Loading…
