-
-
Aak4life reacted to Bextreme04's post in the thread New cluster/gauge install…Nothing works!!! with
Like.
Also make sure your ground is there and connected(cleanly) to the tabs sticking out of the top of the parking brake mounting bracket... -
Aak4life reacted to dsteelejr's post in the thread New cluster/gauge install…Nothing works!!! with Like.
I did the exact same thing you are doing on my ‘80 K25, except my reason for it was it had idiot lights and I wanted factory style...
-
AYou might need to swap the printed circuit also.
-
Aak4life replied to the thread Dash cluster problems.this brings me to a question for you.....does the i/p need to be grounded to E- brake pedal bracket ? because i didnt reinstall my...
-
AIf it has a voltmeter it’s not a ‘75 cluster. However, it could have been modified. The ammeter cluster connects to two wires under...
-
AWe may have... I went and looked. It does have C6P and Camper Special package. But based on how I got the truck, it would seem odd...
-
AI think it’s a regional thing too. I hardly ever see a semi-floater on anything around here. Lots of high GVWR K20’s and K30’s here and...
-
AThat's what I mean, all the '81-up 3/4 ton trucks that I have seen with the 10.5" were C20's and of them, they all seemed to be big...
-
Aak4life replied to the thread Dana 44 front on a 1981?.im pretty positive a guy with enough money can straight order a vehicle with whatever config they want from factory if its available and...
-
AThe 10 bolt started seeing use in '77. How long the D44 was sporadically used after that, will probably be up for debate for the rest of...
-
Aak4life replied to the thread Dana 44 front on a 1981?.are the 44's for sale ? and whats the prices if so, and while im at it where is location? to get idea on shipping...lol. if for sale ....
-
A77 K25 d44 no idea ratio tho I also have a 78 k10 with d44 Also for fun, a rear D60 semi float 5x5.5 4.10 from a 67-72 ish f series
-
AGood thought, but the flattop knuckle for the passenger side was only up to 76 or 77 vehicles. So they would have to locate a flattop...
-
Ahttp://www.billavista.com/Tech/Articles/14-Bolt_Bible/index.html
-
AThey are... the 10 41 is telling you that you have a 10 tooth pinion and 41 tooth ring gear, for a 4.10 gear ratio. The front ring gear...
-
-
Loading…
-
Loading…
