-
-
85 Squarebody76 replied to the thread First Square body.Welcome aboard from Missouri -
85 Squarebody76 reacted to mikeoverland's post in the thread IT'S IN!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! with
Like.
I don't think that a modern vehicle could do this without throwing off codes left and right....Old school for the win! Mike in Leon Springs -
I would be looking for a massive vacuum leak. Do you mean you can't get the RPM to go below 3k RPM, or that it wants to die if you get...
-
85 Squarebody76 replied to the thread Rear brake shudder.Yes the short in front and the long in rear... The problem started with the factory shoes. I thought maby new shoes and turning the...
-
85 Squarebody76 replied to the thread Rear brake shudder.I will give that a try... Thanks for your
-
Say I am having a problem with braking on my 1985 GMC 1500. Power disc front and drum in rear. When I apply moderate braking the back...
-
85 Squarebody76 reacted to TPISly-C10's post in the thread 1989 GMC 3500 C&C truck needs intermittent wiper upgrade with Like.
hope some one here explain how to....so i can have wiper delay on mine too :)
-
85 Squarebody76 replied to the thread Rumble strip sensation while driving???.Great air brakes though....
-
85 Squarebody76 reacted to Matt69olds's post in the thread Rumble strip sensation while driving??? with Wow.
Well ****, I found the problem!!! His truck now has a 2 piece rotor!!!! I have always made fun of people who say their destroyed rotor...
-
pedal down, and then start cranking I believe.
-
85 Squarebody76 replied to the thread At a complete loss!.Holly hog nose carbs rock............ I ought to know since I have screwed with so many...... HAHAHAHAHA !!! Gotta love those old fix or...
-
There is only one true “carb” and that’s a Q-Jet. Everything else is a waste of time and money.
-
Fast 99 - we did put it on a hoist and ran it at speed, which is how we caught the wobble from the bent axle housing. Again, if it...
-
85 Squarebody76 replied to the thread Trouble Installing New Engine.I believe the bars from the motor mounts to the lower half cast trans bell housing are there to support the trans and stop it from...
-
85 Squarebody76 replied to the thread Valve stem seals info needed and is it worth while in my case?.That tool works great... I used one for 25 years... Broke the ceramic off a plug and welded a male QD fitting on it to charge the...
-
-
Loading…
-
Loading…
