83 Box
Latest activity Postings About
-
-
83 Box replied to the thread Mirror replacement.This work? https://www.lmctruck.com/towing What you have are called towing mirrors. It must have been someones job to make as ugly as... -
83 Box replied to the thread Hello, my name is Derek, and I have Just joined this page, trying to find some good information on working on my new 1978 k30.Welcome to the jungle. I am redoing an 83 c10 an my radio is about the same. My antenna is connected but mostly get hiss. A lot of the...
-
83 Box reacted to Donald vonMinden's post in the thread Just bought this 87 square body in TN and it’s now home in North Carolina where i’m going to restore it with
Like.
Welcome !!! -
83 Box replied to the thread Just bought this 87 square body in TN and it’s now home in North Carolina where i’m going to restore it.Welcome from Louisiana.
-
I've got a pretty good grip on what's available and what is good and what isn't. I know whatever came on these is going to be sh*t and...
-
83 Box replied to the thread New to the forum, but not to Squarebodies....Welcome and gongrats on your "new" daily. With respect to your rear end and a possible ratio swap, it would help to know if it is a...
-
83 Box replied to the thread OEM cylinder head castings - 1977 K10.I was alive and kicking when the 882s were in use. While OK, they tended to crack and the heat riser went int two of the exhaust ports...
-
83 Box replied to the thread Finally found a good one!.My bad!! It is definitely not a Ford. Apologies to all.
-
83 Box replied to the thread 2 post shop lift.A friend who sells 2 post lifts, used an new, once told me the two most important things with a two post, other than weight capacity and...
-
83 Box replied to the thread Power Steering Squeel.The amount of friction (grip) a belt has is not just how tight it is but also how far around the pulley it makes contact. If the belt...
-
83 Box replied to the thread Buying one of these trucks just wondering if it’s a good deal or not.I have been using LMC for all my parts and haven't found anything they don't have for the box body (and a lot of other year/models)...
-
83 Box replied to the thread Finally found a good one!.Thanks all for the warm welcome. I joined this forum because, after looking for about 16 months, I found a square body that fit both my...
-
-
83 Box replied to the thread Condenser Replaced - a few pics.If you are converting to 134a you should always change the dryer. The dryer cannister contains a dessicant bag that grabs any moisture...
-
83 Box replied to the thread Coolant Hose Popped Off the Thermostat.What altitude are you at? At altitude, the thinner air will make water boil at a lower temp. A 50/50 mix of water/antifreeze could be...
-
83 Box replied to the thread Head versus manifold coolant temps.I found the below online. Based on the pdf, it would seem logical to me that the manifold reading should be the same or slightly...
-
-
Loading…
-
Loading…
