dangOl'dodge
Member
- Joined
- Sep 17, 2015
- Posts
- 46
- Reaction score
- 0
- Location
- canada
- First Name
- C
- Truck Year
- 1987
- Truck Model
- r10
- Engine Size
- 4.3 tbi
ok so im in the process of collecting stuff to swap over my 1987 c10 with a 4.8vortec/4l60e to manual with a 93 nv4500 i have to pick up from a friend. cab is factory auto that has never had a manual tranny bolted up.
i have a set of clutch pedals but from what i can tell they are not hydraulic.. the hydraulic ones i see online look to be a 2 peice set up, my clutch/brake are on 1 plate.
what i really need to know is what master/slave cylinder/line do i need to order to make this work.. the 87 master/line/slave for a hydro clutch or the 93 master/slave/line from a chev 3500 that the tranny came from?
can i make these pedals work or do i need to find a hydraulic set... i literally only have the pedals, no linkages or anything like that.. not really sure how it all works.
i have a set of clutch pedals but from what i can tell they are not hydraulic.. the hydraulic ones i see online look to be a 2 peice set up, my clutch/brake are on 1 plate.
what i really need to know is what master/slave cylinder/line do i need to order to make this work.. the 87 master/line/slave for a hydro clutch or the 93 master/slave/line from a chev 3500 that the tranny came from?
can i make these pedals work or do i need to find a hydraulic set... i literally only have the pedals, no linkages or anything like that.. not really sure how it all works.