No resistance in reverse, drive feels like I'm pushing against the brakes

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

JacksonTaylor

Junior Member
Joined
Feb 6, 2018
Posts
20
Reaction score
18
Location
Nevada
First Name
Sylvan
Truck Year
1985
Truck Model
1500
Engine Size
454
Yeah, so, put the truck in reverse and just at idle it rolls back like you'd suspect but going forward I have to tip into the throttle a bit and it feels like the brake is on. If I let off of throttle the truck comes to an immediate stop (low speed, only rolling up and down the driveway). Brake is released, but even if it were stuck or something it would have the same problem in reverse as forward, right?
 

squaredeal91

Full Access Member
Joined
Mar 10, 2023
Posts
1,816
Reaction score
3,194
Location
Cave junction Oregon
First Name
Greg bush
Truck Year
1991 SB
Truck Model
K30
Engine Size
5.9 Cummins 12 valve
Jack it up and spin tires freely.
If they all spin freely in neutral then check your rear diff out. I've had similar symptoms with failing spider gears.
 

fast 99

Full Access Member
Joined
Dec 31, 2021
Posts
1,637
Reaction score
2,220
Location
Spokane, Washington
First Name
Brian
Truck Year
81,85
Truck Model
K20
Engine Size
350
Not near as much braking in reverse. Smaller front shoe and different material. Yes, jack it up and check for dragging or short drive and a heat gun. Be sure to check emergency brake cable movement. They will sometimes stick and apply the rear brakes.
 
Top