Malwood Hydraulic Clutch Pedal

[70ss496]

Has anyone used one of these for converting to a hydraulic clutch?

Chevrolet & GMC 1973 -87 TRUCK Under Dash Hydraulic Master Cylinder Clutch Pedal Kit (Billet Reservoir) - MalWood USA

MalWood’s hydraulic clutch pedal kit converts your existing pedals into a hydraulics system with an easy bolt in install

www.malwoodusa.com

 

[SquareRoot]

$625.00 ! Pass

 

[70ss496]

I agree but guys are wanting 500+ for the factory 85-87 setups.

 

[bluex]

I modified a 73-84 pedal setup to use a wilwood master. Wasn't to hard to do at all. Look for my NV3500 swap thread for pictures an details.

 

[Ricko1966]

I modified a 73-84 pedal setup to use a wilwood master. Wasn't to hard to do at all. Look for my NV3500 swap thread for pictures an details.

Take some pics post it up. I've been telling people to do this,but the only pics I can show are GM AFX body. NM found it.

NV3500 swap

This is how I went about installing a 96/97 S10 NV3500 into my C10, this way worked for me and will probably be a little different if you use an older or newer transmission. I would stick with 96 and up though as they are the strongest versions of them. Parts list: Purchased through Rock...

www.gmsquarebody.com

 

[bluex]

Take some pics post it up. I've been telling people to do this,but the only pics I can show are GM AFX body. NM found it.

NV3500 swap

This is how I went about installing a 96/97 S10 NV3500 into my C10, this way worked for me and will probably be a little different if you use an older or newer transmission. I would stick with 96 and up though as they are the strongest versions of them. Parts list: Purchased through Rock...

www.gmsquarebody.com

That's it, I made that write up in hopes it would get a sticky an help some people but it unfortunately faded away.