Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Nice truck and welcome back from south central PAWant to update my page with the newest addition to my square family a 1987 gmc I call ruckus 327, th400 3.42 10 bolt. Looking for a driveshaft as we speak. Future plans are for a bbc and 12 bolt 4.11 posi
You must be registered for see images
Sent from my iPhone using Tapatalk
Welcome Back !!! So which tailshaft do you have on the Th400? I have a feeling that's going to be tough one to find a driveshaft for. With any luck, maybe it's a 6 inch slip yoke Th400. If so you'll have a better chance of finding a driveshaft and it'll be from a 4.3 V6 Shortbed truck believe it or not. The 4.3's came with a Th400 and it wasn't the bolt on 4in yoke. but the 6in output that took the slip yoke. If it's donor is a shortbed truck, then the length should be correct.Want to update my page with the newest addition to my square family a 1987 gmc I call ruckus 327, th400 3.42 10 bolt. Looking for a driveshaft as we speak. Future plans are for a bbc and 12 bolt 4.11 posi
You must be registered for see images
Sent from my iPhone using Tapatalk
Welcome Back !!! So which tailshaft do you have on the Th400? I have a feeling that's going to be tough one to find a driveshaft for. With any luck, maybe it's a 6 inch slip yoke Th400. If so you'll have a better chance of finding a driveshaft and it'll be from a 4.3 V6 Shortbed truck believe it or not. The 4.3's came with a Th400 and it wasn't the bolt on 4in yoke. but the 6in output that took the slip yoke. If it's donor is a shortbed truck, then the length should be correct.