5/5 drop c10 help

[77c102door]

I hit a snag on my install. damn lower ball joint is frozen onto the spindle. bfh did no good

 

[Affende]

I hit a snag on my install. damn lower ball joint is frozen onto the spindle. bfh did no good

time to break out the hot wrench.

 

[Honky Kong jr]

I hit a snag on my install. damn lower ball joint is frozen onto the spindle. bfh did no good

Try putting a jack under the control arm to take some of the deflection out of the Suspension so that your blows are more productive. Try that before heating it.

 

[77c102door]

You must be registered for see images attach

Just finished the front. Just need to do the rear. What i ended up doing is making my own ball joint separator jig following the step by step instruction from this guy on another forum
http://67-72chevytrucks.com/vboard/showthread.php?t=624464
Heres a pix of the front

 

[77c102door]

Some more pix. going to start the flip kit next week

You must be registered for see images attach

You must be registered for see images attach

 

[74 Shortbed]

Looks good..

 

[Honky Kong jr]

 

[Big Chip]

Looks like every truck and hotrod in my high school parking lot at this stage!

 

[77c102door]

Ttt finally installed my flip kit. My 295/50/15 are scraping on the fender pretty badly

 

[77c102door]

I

You must be registered for see images attach

 

[74 Shortbed]

Looks good..

 

[Big Chip]

MUCH better! Looks good.

 

[Honky Kong jr]

 

[77c102door]

Ttt

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[77c102door]

Rubbing pretty bad. Right now I have 295/50/15 for rear tires, I was thinking getting 275/60/15. Any suggestions?