Search results

  1. J Knight

    Add a Tach

    You just have to cut a small part of the cluster and it is plug and play with any ignition.
  2. J Knight

    Add a Tach

    I put one in my truck a few years ago, loved it. Note that you can order the older font to match the 73-78 gauge clusters.
  3. J Knight

    Drop shackles and hangers

    Can you post a pic?
  4. J Knight

    stepside vs fleetside bumper brackets

    Holy shit! Man that makes my problems insignificant by comparison. Hope it all works out for you.
  5. J Knight

    stepside vs fleetside bumper brackets

    What up Homie???!!! :wave:
  6. J Knight

    stepside vs fleetside bumper brackets

    73-87 rear step side bumpers are actually 67-72 step side bumpers from the factory so they are significantly different.
  7. J Knight

    Coil spring is popped out of its bucket.

    Check the other side for proper seating.
  8. J Knight

    Coil spring is popped out of its bucket.

    Most likely you will. It really depends on how much spring tension it has after you lift the truck up.
  9. J Knight

    Coil spring is popped out of its bucket.

    The top of the coild is D shaped and the pocket is also D shaped. Make sure its lined up properly.
  10. J Knight

    Out with the old, and in with the Old as the newest Mod !!!

    Congrats Cob! Was Dave more into lawn mowers than squares?
  11. J Knight

    help

    I dont know much about the boost question but if you look at a gear ratio vs. speed chart/graph you can easily pick your desired gear ratio. My guess with 33in tires and overdrive trans you will probly be able to go somewhere between 4.11 and 4.56.
  12. J Knight

    My Truck doesn't exist

    You either have an earlier column in your truck or an aftermarker/repop indicator on your factory column.
  13. J Knight

    2 inch lowering kit

    As far as I know, they dont make any lowering kits for 4x4s. Does it have a lift kit? If it does for example, if you have a 6in lift and you want to go lower you need to get a 4in lift effectively lowering the truck 2in.
  14. J Knight

    Tweaking ride height on a lowered '87 R10

    If you really want to get creative, you can bolt angle iron under the frame and lower your spring shackle mount on the frame to your desired ride height.
  15. J Knight

    Tweaking ride height on a lowered '87 R10

    If you installed a drop shackle with the flip kit you can just reinstall the factory shackle. If you still have the stock shackle you can add a leaf to your springs or get a shorter than stock shackle. I have seen them before but dont know where to get them. Other options is to shorten your...
  16. J Knight

    Wheels help

    5lug x 5in (5x5)
  17. J Knight

    Wheels help

    Usually 4.25in back space is max. 4in would be better.
  18. J Knight

    265/50-15 tire 4-6 drop

    No problem but a 265/50/15 is a very short tire, you might consider a 295/50/15.
  19. J Knight

    lateral traction bars

    Looks pretty cool, but you would think the front pivot point should be even with the front leaf spring bolt.
  20. J Knight

    Dropped and new wheels/rubber

    :headbang::headbang:
  21. J Knight

    Interior paint

    They say SEM products are the best.
  22. J Knight

    glider kit less engine???????????

    In the big truck world(18 wheelers) a glider kit is basically a new incomplete truck. Most commonly they are ordered without an engine/transmission or without rear ends/fuel tanks.
  23. J Knight

    What seat is this?

    It didn't come from any vehicle, looks aftermarket to me.
  24. J Knight

    Lowering my 1982 C10

    From what I have read, a drop spindle with drop cotrol arms is a bad combination because of the spring pocket too close to the ground. You would be better off with drop spindles and drop springs imho. If you have all ready installed the parts, let us know how they work together.
  25. J Knight

    4 link and coil overs...

    http://www.ridetech.com/store/universal-hd-4-link.html http://www.ridetech.com/store/1973-1991-gm-c30-coolride-front-system.html

Latest posts

Forum statistics

Threads
41,847
Posts
903,385
Members
33,362
Latest member
Dhatch84
Top