Search results

  1. 8

    Replacing fan motor

    Got another and it was the same way, so i figure for some reason its made that way
  2. 8

    Replacing fan motor

    Hi, Went to replace my blower fan motor because its tired and doesnt spin too fast... Put it in and it made a ton of vibrating noise. Also, could see there are 4 shiny rivets on it on the outside with it in, and could see little tiny sparks on them every once in a while. Took it out...
  3. 8

    tbi to carb swap trouble !!

    Do NOT oogle the holes. Idiot who had my truck before me did, and it will blow the intake manifold gasket soon enough, already has once before i decided to buy the right intake. Edelbrock part number 2104, preformer intake, canted center holes to make it work You will leak oil and coolant...
  4. 8

    Starter

    The sound continues after its running, just right after it fires up and i move the key grom the start to run position the noise slows as one would just by friction, not immediate but wuickly, but gradually going down Replaced the starter in the truck before and it never made that noise, so...
  5. 8

    Starter

    Hi, Put in a new starter the other day. Installed correctly, and it makes a whir after the engine starts, i crank it, and if i let off because the engine starts it still does it. If i start the truck, i can hear it just the same. Its like the sound of a whinibg electric motor when somethings...
  6. 8

    What filter?

    Hi, truck has no fuel filter so im puttig an inline one in between the fuel pump and carb, what would you recommend? Found a good 40 micron one, russel preformace (on summit), should i be looking for something like a 10 micron or is that good? Has edelbrock carb, 4 barrel 600cfm, everyone says...
  7. 8

    Issues

    Fixed it, engines a bit carboned up anyways so it has a dieseling issue unless im running 93 in it, but for the issues on carb tuning and such it fixed it, oh yea rebuild it with a kit from summit, easy to do
  8. 8

    New intake and carb question

    Or, you can do it so its key on power... but only when the engines running, much better. So if you turn the key on and leave it on, your choke wont open an be ineffective if you forget, on the back of the block there should be a fitting for an oil pressure guage or sensor. Get the little sensor...
  9. 8

    Carbon buildup/issues

    Havent checked plugs but theyre within the last couple thousand miles new, timing is right i think.. Theres the toothed piece, where to the very left of the toothed piece is says 0 degrees, then there a red slider which it looks like someone screwed on thats over to the right of that, around the...
  10. 8

    Carbon buildup/issues

    Hi, So i have an 83 k10, with what i believe is a '90 350, mated to a 700r4 to np208 with what i believe are probbly 3.55's or something similar for the axle gear ratio The 350 has about 40k on the rebuild, mild comp cams cam, i can provide link if necessary, msd ignition, headers, and a...
  11. 8

    Hid headlight wiring

    This one has wiring for power from the battery, ground for each ballast, but then i need switched power to turn on the relay or as this kit calls it, the control module So normally it would plug into where the old headlight connectors which went right on the headlight pins but this truck has a...
  12. 8

    Hid headlight wiring

    Hi, So recently bought some sealed beam conversions from hidkitpros.com, with the bi xenon harness So my question is: where should i wire what would normally go to the stock headlight connectors? I have an isolation module, so that changes all the colors around, but the hid kit has a 3 prong...
  13. 8

    shake

    Only thing i think that may elimate this is that it only does the shake between 1st and 2nd, not in first, not in second, but between it.. could this still be it?
  14. 8

    shake

    What could i do to test for those? Also, my main question here is... Am i gonna have to do any work to the transmission? Seems odd that itsonly between 1st and 2nd no matter the little it of difference in speed your moving when it shifts
  15. 8

    No filter, making a setup

    Hi, So i discovered my truck has no actual fuel filter. No wonder why the carb was so damn dirty when i rebuilt it Has the one in the carb, but its just a mesh one so i assume it doesnt filter much of the actual fuel itself. I want to filter the fuel really well. So, i was thinking of having...
  16. 8

    Np208 transfer case

    Hi, Need a new transfer case, have on in truck now says np208 on it, what else should i look for for identification? Believe is a '90, trucks an 83, but has a 90 motor and a 700r4 in it So what specifics should i look for on a transfer case? How many splines for this uear, what year...
  17. 8

    running sluggish with new headers

    If your serious about that last sentence.... It doesn't "help" power in diesels when blowing black smoke, just in some cases its a bi product of higher power not burning the fuel effeciently. Black smoke is unburned fuel, gas or diesel. Is a diesel, black smoke does not at all mean the engine...
  18. 8

    shake

    Possibly, did one like a year ago, but its lifted and my friends trucks always eat them up... driveshaft doesnt move when you try to wiggle it/turn it, and it doesnt happen like 30ish which ive seen ujoint do it... its only when shifting... could that be it? It is the kinds of shake you get when...
  19. 8

    shake

    Hi, I have a 1983 k10 with what i believe is a 1990, but deffinataly a 700r4 So when im sitting at a stoplight,once it turned green id accelerate pretty heavily, and at some point a few weeks ago when it went to shift from 1st to 2nd i would get a shake, if i let off a little the shake would...
  20. 8

    Headlight conversion, harness?

    Ohh okay, its this one where under hid kit you choose the one with both http://hidkitpros.com/shop/h4656-sealed-beam-headlight-conversion-whid-kit/ And, i have a later suburban or crew cab front grill, high beam and then low beam light next to eachother with a long running light beneath
  21. 8

    Coolant boil

    Just because i noticed a difference, plus when i start it up i usually wait a minute before driving away to let it cool off, what would you say is too high to drive it at? And, i had a old dish soap bottle someone put in there, i assumed it was just so coolant didnt drop to the ground, but...
  22. 8

    Coolant boil

    Oh, no, its a tube i just let hang to the ground...
  23. 8

    Coolant boil

    Hi, So when i recently did an intake manifold gasket & heater core on my 83 k10 with a 350 Before i would shut the truck off, and the temp gauge wouldnt really go above 200 at all Now, it goes up to 215 wqhen off, start it up and it cools down The only problem i have with this is that it...
  24. 8

    2 in body lift for 35s?

    Honestly, your engines not even making peak power then. Typically, as far as my knowledge extends, for torque itll peak around or before that, but horsepower wise youll keep making power to 4, maybe even 5 rpms Correct me if im wrong guys, i might just be talking out of my ass here
  25. 8

    Headlight conversion, harness?

    Ohhh alright thanks! And, which i said switch i meant it differently, wrote it wrong I meant that somewhere something i saw led me to believe the same headlight (Cause i have quad headlights, 2 for low 2 for high) would have high beam and low beam abilities. Also, theres a splitter they have...

Latest posts

Forum statistics

Threads
42,074
Posts
908,448
Members
33,548
Latest member
garethrowsell
Top