Search results

  1. fussfeld

    No CRANK after rain......

    No Crank after rain Battery good. Lights good etc. It WILL start after everything dries up. Just the standard 70's-80's set up with HEI. Any ideas?
  2. fussfeld

    Cranks good, no start / hard start engine cold or warm:

    i'm sorry to write a book about this, but i feel this is the only way we'll solve it. Background: quadrajet HEI ignition Stock-ish cam---like 184/195 @ .50"---- so decent vacuum etc. 1) Prior to the no start/difficult to start problem, the engine would start cold within 1 crankshaft revolution...
  3. fussfeld

    No start/hard start cold or hot:

    i'm sorry to write a book about this, but i feel this is the only way we'll solve it. Background: quadrajet HEI ignition Stock-ish cam---like 184/195 @ .50"---- so decent vacuum etc. 1) Prior to the no start/difficult to start problem, the engine would start cold within 1 crankshaft revolution...
  4. fussfeld

    Overflow tank hose size?

    Radiator overflow tank hose size? i'm ASSuming 73-91 was the same? But to be specific, for 83 model year and small block. Note this is the smaller hose running from the radiator cap to the overflow tank, NOT the hose running from the thermostat to the radiator or from the radiator to the water...
  5. fussfeld

    Is it harmful to drive in "2" for long periods of time?

    Trans is TH-350. Is it ok or harmful to the transmission to drive in "2" for long periods of time? i'll get into why, if we make it that far.........
  6. fussfeld

    Needs some part #'s :

    These are the 87 and up centerbolt valve covers. i'm ASSuming v-8 SBC is the same as 4.3 v-6 (i have the v-6). 1) The oil hole grommet AND a cap that will fit into that grommet are the most important now. 2) The hole that would normally have a hose coming out of it and going into the air...
  7. fussfeld

    How much pressure does a mechanical pump put out at idle?

    How much pressure does a STOCK mechanical fuel pump put out at idle----say 400-600rpm?
  8. fussfeld

    Return line hose size?

    Would anyone happen to know the return line hose size that comes off the mechanical fuel pump? NOT the actual metal return line that runs all the way back to the tank, but the rubber hose(that runs from the mechanical pump) that CONNECTS to the metal return line back to tank. i'm trying to...
  9. fussfeld

    Float settings for carb # 17086046:

    Anyone know where i can find the float settings, IN PRINT, for carb # 1708646? This is a quadrajet off of a 4.3 v-6. It's probably 13/32", but i want to make sure. i checked the 86 service manual, but that carb# isn't listed. (?) This was the general service manual for all light trucks...
  10. fussfeld

    fuel pressure regulator placement:

    i heard/read that fuel pressure regulators should be located as close as possible to the carb. If so, why? And, how close is close? Is the firewall good? Fender? Or right on the intake? a) If on the intake, then could i get some mounting ideas? b) Also, could i get some good gauge ideas...
  11. fussfeld

    Are all quadrajet idle tubes generally the same size?

    i'm really wondering if quadrajet idle tubes are basically the same size, in general?
  12. fussfeld

    No license plate lights on one side:

    i'm not getting any light on the right side(passenger side) license plate light (the one with the black wire). This is the factory (or dealer installed?) step bumper. i bought a whole new assembly and installed it , but still no light. The old one was rusted out. The left side/driver's...
  13. fussfeld

    LED equivalent to #67 bulb?

    Is there a decent LED equivalent to a #67 bulb? These are the "mini-bulb" license plate lights.
  14. fussfeld

    How to switch to roller cam?

    One thing i've never been clear on is, how do switch from a flat lifter cam to a roller in a SBC that was originally equipped with a flat? Technically, all you need is lifters with the link bars and the appropriate cam and you're good? You don't need to drill/tap and get a special spyder tray?
  15. fussfeld

    88-99 chrome 1/2 wheels:

    Can the 88-98 1/2 ton chrome wheels found at the salvage yard be made really shinny such as here: From here, for example: If so, how? 2) Do you need different lug nuts for these wheels? 3) Also, if you know the backspace of these wheels, this would be helpful too. i was going to go...
  16. fussfeld

    Why hasn't this truck moved.....in months?

    Everything i need and want----except the 4X4. Even the color is right and i've always wanted a 6.2 diesel. https://baltimore.craigslist.org/cto/d/1989-suburban-4x4-diesel/6656922364.html ok, maybe the rust is turning me off?
  17. fussfeld

    Best radiator

    1) What is the best radiator, money no object? (i'm looking at Mishimoto....) 2) Best radiator for the money/decent (non-crap) autoparts store radiator? Thanks.
  18. fussfeld

    Vortec valve cover accesories:

    i need part #'s for the following: 1) pcv/breather grommets 2) Breathers* 3) Oil hole grommet 4) Oil cap * * Stipulations: 5) This is for 87 and up vortec valve covers. 6) Prefer OE GM, although high-quality after market is ok; Dorman is probably ok, but i'm thinking K+N /Trans-dapt etc...
  19. fussfeld

    Dipstick problem..............

    Need a solution for this problem: 1) It's an 87 block 4.3 v-6 (this itself may be a problem as i'm not totally sure if they take the exact same size dipstick tube as a v-8 small block? 2) i have the dipstick tube from an 86 block. It does not seem to fit the 87 block. OR maybe it is...
  20. fussfeld

    O..............k................

    https://washingtondc.craigslist.org/mld/cto/d/1977-ford-work-truck/6681510166.html
  21. fussfeld

    About how much needs to be added after new trans install?

    Does anyone have any idea of how much more transmission fluid needs to be added to a new/reman trans install? 1) Reman TH-350 which was filled by the rebuilder. 2) i flushed the cooler, but that was only a few pints. (stock in-radiator cooler 2wd) 3) The new converter was filled with about...
  22. fussfeld

    Need high quality transmission seals........

    Does anyone know who makes, or where i can get high quality transmission seals? Specifically the dipstick and kickdown cable seals? These would be the "top hat" type. This is for a TH-350. i know you can get them at the autoparts store, but i'm unsure of their quality.
  23. fussfeld

    i may want to take the grill and rad support off.............

    What would be involved with taking only the grill and radiator core support out? Not the entire front clip. (This is an 83) Since i need a new trans, the engine could use some engine stand tuning AND i need a new radiator, i'm thinking this is a good way to go? Although, if too much work, i can...
  24. fussfeld

    Need a good TH-350 replacement:

    Looking for a good quality TH-350 transmission replacement. Must be 9" tailshaft, thank you. Unfortunately, TCI is out because too many bad reviews. This is unfortunate because the street rodder model is a direct bolt in. i am waiting for ATI to get back to me if they offer any with a 9"...
  25. fussfeld

    How do you know when it's time to replace u-joints?

    Is there a way to check the condition of u-joints? Or do they start making funny noises etc?

Latest posts

Forum statistics

Threads
42,052
Posts
908,050
Members
33,535
Latest member
shmattly
Top