Search results

  1. Radiohead

    New guy here from Wyoming.

    Welcome aboard podna!
  2. Radiohead

    Is there a way to install a 81-87 bumper on a 73-80 frame

    There is. Exactly what the dumb$#it's did to mine before I got it. But mine could be from a 400. Bird$#it weld. I think I would replot holes and bolt it on. I have an appropriate utility bumper in the parts pile for it. The day I feel like being showered in grinder sparks, it will go on. Edit...
  3. Radiohead

    Gonna build a trailer...

    Kewl! I did a flatbed conversion to an old boat trailer. Like this It runs considerably more than 60/40. You can see what it gets used for so far. I made it to haul 21' sticks of black pipe and tower sections. Keeping it light ;)
  4. Radiohead

    Did they mess up belts?

    I can't speak to a small block, but on a big block they have the AC running off the PS dual V groove with the PS running off the crank/WP in the other. Thusly This is a '79. I can't imagine it's much different on a SB of a similar vintage and options list. I hope this is helpful.
  5. Radiohead

    Gonna build a trailer...

    If you have too much weight hanging out back, it's gonna track squirrely. Having had a couple of these pickup conversions, my advice is 60/40 - 60% in front of the trailer axle center line and 40% behind. Even if you could get to 50/50, it still won't track right if more weight is behind the...
  6. Radiohead

    What have you done to your square lately??

    Redid the roadkill fuel pump situation to one that actually puts fuel into the Q jet, so I can move it around as jobs dictate. Relocated the gas can so now I can actually close the hood. After removing the jack bolts and hardware.
  7. Radiohead

    Jack ideas?

    Dang it fellas, I hadn't given any thought to a jack system. The original is long gone, and I have some 20 tonners that I can sacrifice for the cause. Odds are I'll finish this project first and then can spare one for ole Pearl.
  8. Radiohead

    Lowering truck

    While you're asking about a one piece shaft I assume, half ton application, I found a static 3/4 kit listed for my c20 and I can't imagine it will matter to the short half shaft hanging out past the carrier bearing. But I don't know for certain, yet.
  9. Radiohead

    Mandrel exhaust shop

    Makes absolute sense to me. For all the reasons posted.
  10. Radiohead

    help with c20 drop..

    Don't know if this will help you mate, or if you will even see it, but I ran across a link in another thread that addresses the issue. It gives you the choice between bolt on or clip on in the fine tuning part of ordering. Hope it helps Sean. https://switchsuspension.com/product-result/
  11. Radiohead

    Finding Serpentine Belt Lengths

    I would measure with the tensioner in the mid range and go with the closest sized belt available. That way you have some range to work with that would hopefully keep adequate tension.
  12. Radiohead

    Is this the camper wiring on my 1981 C20 Camper Special

    Yup, that's it. Good find It's been raining crazy here the last few days and of course I have the truck out from under the carport. I am still going to check under mine, now cuz I want to see if that got butchered underneath like the fuel system and the tank selector got before I bought it.
  13. Radiohead

    Is this the camper wiring on my 1981 C20 Camper Special

    Now my curiosity has been bumped. I will go look at mine after the rain moves east
  14. Radiohead

    Is this the camper wiring on my 1981 C20 Camper Special

    That looks like the wiring used to hook up trailer lights, not something factory, unless they were using those same rolls of 4 color ribbon. Have you traced them to an origin?
  15. Radiohead

    What is this?

    Lol, Someone will pay good money for it, just a matter of when. Tag it and put free money aside.
  16. Radiohead

    Steering box frame reinforcement weld in plates

    I'll be sure to check mine out when reseal time rolls around. It was an actual camper special in its previous life, so its worth checking out, even being only 2wd. Very much sooner than later. Steering is sub-system two on the punch list.
  17. Radiohead

    Th400 orange wire

    Yup
  18. Radiohead

    No fuel in carb at start up

    Fuel pump not check valving itself overnight?
  19. Radiohead

    What have you done to your square lately??

    That thing is gorgeous! Score
  20. Radiohead

    How can i separate my rotor from hub? Looks like its all one piece need help!

    Could use an air chisel with a mushroom head bit. Probably how I would do it just cuz I'm lazy like that. I'm sure that's how changing the drums will play out. But here's what I find. This is Rock, but it has the picture. One piece unit.
  21. Radiohead

    What have you done to your square lately??

    You got the dope scope to work?? Far out!
  22. Radiohead

    How can i separate my rotor from hub? Looks like its all one piece need help!

    I thought the c20 had one piece hub/rotor assemblies? I could be wrong, haven't got that far on mine yet. If not, you have to punch all the studs out to separate the hub from the rotor, kinda like the rear drums IIRC. Or are those threaded holes a place to push against the hub? Am I right fellas?
  23. Radiohead

    door lock cyl. removal

    Likely the rubber gasket has melded the two together. Or rust. Try light 'persuasion'.
  24. Radiohead

    350 tbi stumbles and backfires under load

    IIRC, one should be able to see the fuel spray in real time to a point. A timing light can help. Watch for drips too.
  25. Radiohead

    350 tbi stumbles and backfires under load

    Doh! Missed that. While still on the fuel idea... Bad fuel delivery, like pluggy filter ot weak pump?

Latest posts

Forum statistics

Threads
42,338
Posts
913,941
Members
33,841
Latest member
85Shortsquare
Top