Search results

  1. P

    Rear Gear Install for C10 with TH350

    I have a Goodwrench 350 with 290HP. I am replacing the cam with a 480 lift / 107 degrees separation, roller rockers and adding 64cc/180cc heads. I want to add a torque converter around the 2,000 - 2,400 range to compensate the cam, but would like to replace the rear 2.73 gear with something...
  2. P

    Steering Stabilizer on a C10

    Has anyone installed a steering stabilizer on a C10 before? I have completely replaced everything on the front of the truck and the steering feels good. What I have noticed is, while driving... the truck wants to follow ruts in the road and when turning I have to help steer the wheel back to...
  3. P

    CPP Lowered Spindles

    Has anyone installed CPP spindles before? I have heard these spindles give a more narrow track width than other aftermarket spindles. I currently have McGaughy's 2.5" drop spindles installed with 2" coils, but trying to compensate for the so called 4.5" drop. It ended up being 5.5" drop. I have...
  4. P

    Lowering kit is lower than expected... issues!!

    After installing the 4.5/6 McGaughys kit and running 20x8.5 (4.75 BS) with 255/45/20 tires there is a ton of rubbing issues. I think this kit lowered the front of the truck about 5.5” instead of 4.5”. Is it possible I may have done something wrong? Really frustrating.... I don’t who’s truck...
  5. P

    HELP!! McGaughys 4.5/6 kit issues

    Hey everyone. I installed the 4.5/6 kit this past weekend. Has anyone ran into the issues I have listed below? Issues I ran into: - rear shocks were not long enough to work with the shock relocation brackets. they were about 2” too short. I had to use the OEM shocks. - front shocks I had to...
  6. P

    Syndicate Dakota Digital vs Classic Instrument Gauges

    I'm wanting to upgrade my current OEM gauges with something that has somewhat of an OEN look, but brighter and more modern. I am looking at 2 different ones. The Syndicate Dakotas and the Classic Instrument (close to OEM look) gauges. Has anyone installed either of these in their trucks? if so...
  7. P

    1985 C10 Dash Gauge Wiring

    I am ordering a new gauge cluster (Classic Instruments) for my C10. The OEM wiring harness plug has to be cut and re-attached with the new harness connector. Sounds easy enough... but very challenging without a wiring diagram. Does anyone know where I can get a wiring diagram related to the dash...
  8. P

    Headlights on bright, bottom only

    Hey y’all. I noticed today that my low beam lights work fine, but when I switch to high beams only the bottom lights come on. The top low beams go out. Is this normal or should all 4 be lit using brights?
  9. P

    1985 C10 Lowered with 20's front and 22's rear

    Hey everyone! I am new to this forum as I just bought a 1985 C10 shortbed Chevy truck. Currently it is all stock and I want to lower the truck with 20's front and 22's on the rear. But not wanting the "slammed" look. Does anyone have suggestions or pics I can see? Thanks!

Latest posts

Forum statistics

Threads
42,271
Posts
912,753
Members
33,776
Latest member
graymoon
Top