Search results

  1. K

    Door speaker wiring

    3/4 MDF....some cutting and router work. Then carpet. Sent from my SM-G955U using Tapatalk
  2. K

    Another loose connector. Please help identify.

    It looks like you could push the fuel sender wire onto it if needed....it is a replica of the Male fitting at the top of the fuel sending unit....does it just go together if you only have one tank? Sent from my SM-G955U using Tapatalk
  3. K

    Another loose connector. Please help identify.

    So I looked through schematics first as to not bother anyone...but I can't figure out what this connector does. It comes out of the main wiring harness at the same spot the fuel sender wire does for the driver side tank. You can see above it in the pic the fuel sender wire. I have no fuel...
  4. K

    Convenional vs Synthetic

    Z Sent from my SM-G955U using Tapatalk
  5. K

    Tachometer dysfunctional

    My Tachometer no longer operates. It pretty much stays pegged around 2500 or so. I tested for 12 volts and s good ground going into the back of the guage. And I tested for 12 volts and a good ground going into the distributer... all good. Is there a way to test the sending wire from the...
  6. K

    Please help identify this connector...

    That's what I needed...thanks Sent from my SM-G955U using Tapatalk
  7. K

    Please help identify this connector...

    I wonder if an adjustable pressure switch like for a lock out converter might work? Sent from my SM-G955U using Tapatalk
  8. K

    Please help identify this connector...

    Awesome thanks! Know where I can buy one? Sent from my SM-G955U using Tapatalk
  9. K

    Amp settings and speaker placement

    Here's the back...clustered but organized. As a design goal I didn't want to drill any holes in the truck at all other than running wires to the doors. So all amps, crossovers, power supply lines etc were mounted to the speaker boxes. Sent from my SM-G955U using Tapatalk
  10. K

    Amp settings and speaker placement

    In the back I have the standard 6×9s in boxes and a full size 12" sub. I'll get pics later. I can get the bench seat most the way back....but not all the way back. Obviously this wouldn't suit tall people. But I'm 5'8" and fit really comfortable. My son is shorter than me so it works well...
  11. K

    Amp settings and speaker placement

    Sons Christmas present Sent from my SM-G955U using Tapatalk
  12. K

    Amp settings and speaker placement

    I have a 6" component set in my doors...bottom front corners. And the 3 inchers in the dash corners. They actually work very nice together if you balance them right. What the dash speakers do for you is raise the sound stage closer to ear level so you don't feel like you are listening to a...
  13. K

    Door speaker wiring

    All done with the stereo... Sent from my SM-G955U using Tapatalk
  14. K

    Testing guages while on the workbench.

    I have my instrument cluster on the workbench now replacing the backing plate (which disintegrated upon removal) and inspecting everything. What initialized this action was an inoperable speedometer. What I found was that the stub out to accept the speedo cable....was extremely off center in...
  15. K

    Anyone go efi on their chevy 350s...experiences?

    Looking at the holley sniper for a down the road project. Anyone do this? Was there a gain in fuel economy? What was a rough total system cost? Thanks Sent from my SM-G955U using Tapatalk
  16. K

    Door speaker wiring

    Door conduit installed...lot of work Sent from my SM-G955U using Tapatalk
  17. K

    Door speaker wiring

    Doors back on....one dam boo boo Sent from my SM-G955U using Tapatalk
  18. K

    Door speaker wiring

    A few pics to let everyone see Sent from my SM-G955U using Tapatalk
  19. K

    Speedometer adjustments

    That's what I'm thinking....bite the bullet, keep everything stock and it'll be an easy switch back down thy he road. Sent from my SM-G955U using Tapatalk
  20. K

    Speedometer adjustments

    Over $100 shipped though. Makes deciding tough. I think the gears are less than $20...but a lot more work. Sent from my SM-G955U using Tapatalk
  21. K

    Speedometer adjustments

    Thanks guys! Sent from my SM-G955U using Tapatalk
  22. K

    Speedometer adjustments

    I know some systems allow adjustment via gears for larger tires etc...but with the speedometer cable going into my 4×4 case I can't see a way of doing this. Anyone know a way of calibrating speed on an 85 k10? Sent from my SM-G955U using Tapatalk
  23. K

    Please help identify this connector...

    Here is a pic of my right side valve cover with the connector by it. The connector will reach but it is a tight fit. All I have on my valve cover is a grommet. Is that the correct location of the sensor? I need to get one and can't seem to find part numbers. Anyone know the technical term...
  24. K

    Please help identify this connector...

    Last question. I'm looking for the sensor part # I found something called the coolant temp sensor in the electrical....then powertrain control section of the parts diagram. Number 15326386 Can anyone verify that is the correct part... the temp sensor on top of the passenger side valve cover...
  25. K

    Please help identify this connector...

    Never mind any of the above. I just realized there is a brass plug in tv he valve cover, passenger side. During the motor swap previous owner forgot to replace that switch. Jim called it. Has nothing to do with the choke. I just need to get a temp switch, replace and plug in. Thanks to all...

Latest posts

Forum statistics

Threads
42,063
Posts
908,252
Members
33,542
Latest member
willyg
Top