Search results

  1. Obwonkonobe

    700r4 weak 2nd gear shift

    SUPER help full thank you! Next time I have the valve body off I’ll defiantly be taking a look at those posts
  2. Obwonkonobe

    700r4 weak 2nd gear shift

    The kit had me plug a hole near the 2nd gear servo, and I’m going to play with the shins this weekend. The kit only says to use the washers to adjust. What’s this hole I can drill out? Even though it’s a daily I don’t mind harsh shifts, just makes all my drives more enjoyable
  3. Obwonkonobe

    700r4 weak 2nd gear shift

    Dexron, just genaric Autozone stp brand, I may pull the pan and check the side to side band clearance, but before that I’ll remove one small shim because I have a bad feeling I went overkill and set it too tight. Is there something I can check in the valve body if I drop it?
  4. Obwonkonobe

    700r4 weak 2nd gear shift

    It was rebuilt to a stock referbished condition the first time before the shift kit andmy rebuild. I’d heard that b and m wasn’t too good on quality so I went transgo, and was fairly pleased before my own rebuild
  5. Obwonkonobe

    700r4 weak 2nd gear shift

    So I recently rebuilt my trans, an 89 700r4 with a transgo shift kit, corvette servo, 13 cane pump, boost valve, and a transgo 3-4 spring upgrade kit. Once it was topped off with fluid I took it for a test drive and while I do have all gears, and they do appear to be holding solid, 2nd gear...
  6. Obwonkonobe

    700r4 rebuild time, advice?

    Fuzzy dice projects has an amazing video series for a 4l60e, and it’s very close to the 700r4, it’s about all I used. Aslong as you know your way through the valve body you should be fine just using that @SDJunkMan
  7. Obwonkonobe

    700r4 rebuild time, advice?

    She’s all done. Honestly way easier than I expected. Biggest thing: find a lip wizard and some thick plastic paper from hobby lobby, the thickest you can get for those seals I did go and use some 4l60e pistons with molded seals, and I liked the quality of those way better than the other lip...
  8. Obwonkonobe

    700r4 rebuild time, advice?

    Got it pulled just now, the slot for the pump seems to be equal to the gap that was between the motor and trans, so I feel good saying that the pump disengaged, thankfully nothing seems shredded, just a little chewed up on the snout of the converter
  9. Obwonkonobe

    700r4 rebuild time, advice?

    I’ve heard the same about monster, I love their video series, but I’m not convinced on their product. And as far as the other one goes I think I’m going to hold off on a converter until the motor gets it’s final cam so I can match them, but I appreciate it!
  10. Obwonkonobe

    700r4 rebuild time, advice?

    I’ll have the transmission on my right and my laptop on my left haha, my biggest concern is finding a good rebuild kit. Has anyone had good experience with a kit under 200 and can recommend a company?
  11. Obwonkonobe

    700r4 rebuild time, advice?

    I’ve gone the shop route before and doing it myself I’ll cut the cost in half, it’s a skill I’ve always wanted and I don’t have the money for a shop right now anyways so I’m just taking this as an opportunity, fingers crossed I have the same luck as you
  12. Obwonkonobe

    700r4 rebuild time, advice?

    was driving home from work yesterday and started hearing a nasty rattle. Looked under the car and saw that my trans had unbolted itself from the motor... I got really lucky on this one, see pic. I got some hardware, bolted it together, and started on my way, but after that it started slipping...
  13. Obwonkonobe

    Best r4 compressor brand?

    I have a shop lined up to do the job for 70, and I’d rather have the simplicity of a shop for something like that, I have the accumulator and May flush it before install, and I’ll give that orifice tube a shot
  14. Obwonkonobe

    Best r4 compressor brand?

    Okay so I’ve looked and looked for a ford blue tube but can’t find a part number anywhere, any leads?
  15. Obwonkonobe

    Best r4 compressor brand?

    I just went and picked that exact one up at Autozone myself, fingers crossed it works out, thanks! I wasn’t able to find that part number prior
  16. Obwonkonobe

    Best r4 compressor brand?

    WHEN my system works it’s great, I got 37 degrees out the vent when it was correctly charged
  17. Obwonkonobe

    Best r4 compressor brand?

    Do you have the brand name you used? I think I’m going to go the same route as you, get a new one for now, but plan on a sanden conversion can you link that sanden conversion thread?
  18. Obwonkonobe

    Best r4 compressor brand?

    Alright, two summers in a row I’ve had to replace “four season” r4 compressors, and my newest one only lasted a week... to hell with that. What are brands to look for that sell quality 100% new ac compressors? I know ac delco is a for sure good brand but if there’s a cheaper option I’d rather go...
  19. Obwonkonobe

    Appraise my truck

    The dash was hacked to shit before I got the truck, you may notice that even though it’s a 78, it has an 80s style dash haha, but behind the stereo I’ve got brackets to hold it in place pretty well, no rattles at all. And yes this is very much a “custom” truck. I’m not saying it’s worth all that...
  20. Obwonkonobe

    What non 73/87 parts have you swapped into your squarebody?

    My tailgate hinges are awful, I’m pretty sure they’re missing some pieces, or they’re just that bad. What went into swapping in a later style hinge set, and how do you like it?
  21. Obwonkonobe

    Appraise my truck

    Actually now that I think about it when I went in for smog the first time they just sniffed it, and it failed horribly. But then I spoke with my insurance company and SOMEHOW found a way to get around it for the life of this truck now, but I can’t for the life of me remember how I wish I had...
  22. Obwonkonobe

    Appraise my truck

    I know I’m asking high, and honestly I know it most likely won’t sell, but if I didn’t know anything about the market and was pricing it based off my personal love for it I’d be a firm 15000. So credit should go to this thread for talking me down. Although I set a personal best on mpg today...
  23. Obwonkonobe

    Appraise my truck

    Yeah I know a corvette isn’t the BEST thing for milage, but since I can only have one car in my life rn it seems like the best compromise between practicality and go fast, but unless I get 8500 for it, I’ll problably buy a new msd distributor and let the efi control timing as well In an attempt...
  24. Obwonkonobe

    Appraise my truck

    I know that’s the usual light newer car to go to for a small block, but I just can’t stand the look of them. I figure a c4 would have: Overdrive from the factory Rear independent suspension Factory fuel injection Disc brakes all around Weigh 1000 lbs less off the bat Be the “newest” car with a...
  25. Obwonkonobe

    Appraise my truck

    I’ve looked into it but between finding a parking space at home and insurance, I can only hold one car in my life right now, and I know my way around a small block pretty well by now so a c4 just kinda naturally came to mind

Latest posts

Forum statistics

Threads
42,129
Posts
909,773
Members
33,622
Latest member
timk
Top