Search results

  1. W

    I know the fuel resistor is 90ohms but what is the wattage

    So I had the 'only goes to a quarter tank when i fill up' thing before and found on the forums about the bad resistor behind the gauge. Checked mine and found i didnt have one. instead of buying the stock ceramic one for $20, I got 2-180 ohm 1/2 watt resistors and put them in parallel. It fixed...
  2. W

    Hazard light setup. What am I missing?

    Is the turn signal flasher and hazard flasher the same one or two separate?
  3. W

    Hazard light setup. What am I missing?

    working on my 83 k10. History is I bought the truck and all oem wires were gone. Had a painless harness installed. Only enough wires were connected to make the engine run. I wired up the rest for everything I needed. Now I’m trying to tackle the hazard lights. At the multifunction switch I see...
  4. W

    Wiper arm interchangeability

    I got an 83 so yeah the squirter is in the cowl. Thanks for the part numbers. I will check them out.
  5. W

    Wiper arm interchangeability

    I know LMC has some but tack on shipping and now it's a $26 wiper arm. Looking for more cost effective alternatives.
  6. W

    Wiper arm interchangeability

    so I think I tossed one of my wiper arms in the trash. I found a 79 k10 in the junkyard bu minus it's wiper arms. Do the next generation of Chevy truck wiper arms work on squarebodyies? Has Anybody try it?
  7. W

    The infamous 10" bumper

    I'm looking for a trailer hitch. There are 2 different kind depending on if u have the 10" bumper or not. So the 10" is only aftermarket? It was never OE? What do I measure? The top part u step on?
  8. W

    The infamous 10" bumper

    What is this 10" bumper? Got pics? I need to know if I got one or not. Plus I'm just curious
  9. W

    Universal washer pump

    so I'm trying to install a universal windshield wiper wash motor on my 83 k10. The one molded to the wiper motor is broke and this is easier. My question is what wire(s) is the one that activates the washer motor from the switch? Does the switch supply the power or ground? I've looked up...
  10. W

    Junction block power

    Thanks for all the responses. First of the truck interior was gutted so no existing bulb socket. Second I guess I didn't look hard enough in the LMC catalog since I missed their socket listing. But $19.95 plus shipping? No thanks. Third thanks for the clarification on the double contact and the...
  11. W

    Junction block power

    Thanks for the help and diagrams guys. On to the next problem. I got the led dome light, lens, and chrome bulb housing from LMC. I can't find the bulb socket anywhere. Oreilly comes up with a tube type bulb. And no socket for it either (not that it's right anyway). I guess it originally took a...
  12. W

    Junction block power

    Where does the junction block on the firewall get its power from? The batt/ alternator or fused from the fuse block? Got a wiring diagram? Thanks
  13. W

    LMC headlight harness upgrade

    Thanks for the links. I searched the forum prior and came up with no real results but a lot of pop ups
  14. W

    LMC headlight harness upgrade

    Has anyone installed the LMC headlight harness upgrade on their truck? If so I got some questions for u. Also, how do u stop these damn pop ups that are on every page!?!?!?
  15. W

    Missing hvac vacuum motor?

    Sweet! I just found a pic of the outside air actuator on a squarebody from a Google search the tool me to another gm squarebody forum thread. I hope mine works
  16. W

    Missing hvac vacuum motor?

    As in under the piece between the windshield and the hood?
  17. W

    Missing hvac vacuum motor?

    How many vacuum motors should I have in this truck? In the hvac air box are 2 vac motors, the defrost and the heat and ac, and one on the pass. Side kick panel, which I think is the recirculating one. The closest vac diagram I have show a 4th vac motor called the outside air actuator. Where is...
  18. W

    Steering column stub shaft bearings help

    The whole stub shaft isn't destroyed but the cage and balls are. I actually found what I needed by contacting my old steering and suspension teacher. He had a bunch of extras. So if this place isn't the best to find parts for square bodies what do u recommend?
  19. W

    Steering column stub shaft bearings help

    I got a loose steering wheel on my 83 k10. It's not the tilt ( I wish cuz then it would be fixed by now). I disassembled the column and found the lower support bearing for the stub shaft was destroyed. I only found a couple of pieces of the bearing cage. Anyone one know where to find this part...
  20. W

    Power to manual windows and other ?'s

    Hey everybody Im new to this site and new to owning a square body as of last Tuesday. I have a 83 K10 that use to belong to a former auto tech classmate of mine that sadly killed himself a few years ago and his parents just put his truck up for sale which I bought. His restoration was...

Latest posts

Forum statistics

Threads
42,110
Posts
909,318
Members
33,597
Latest member
cesardelacadena
Top