Search results

  1. Y

    Help with hood gap

    Have two giant hood gaps on either side any advise on how to get rid of them ?? Hood is off a different truck driver side door and fender are new. I believe it had the giant gaps with stock body panels.. seems as tho my fenders need to be moved inward But can’t get them to budge .. and even...
  2. Y

    Ehatx wrong with my distributer cap?

    why did this happen?! All parts new rebuilt distributer. Must be why it won't start?
  3. Y

    Keep blowing inline fuse under the hood!

    my truck keeps popping inline fuse under the hood but why ?? It's the one between the ignition switch and distributor it's slowly starts to miss then blows..pictures attached.. Wen I originally blew the fuses under the hood I replaced them with the style in the pictures ..originally blew after...
  4. Y

    Body lift

    Looking to make cheap body lift cab only my truck has a custom flatbed .. What to use ? Hockey pucks? How far can I go without other problems? Only reason for this is I am making a custom winch mount behind the bumper need an inch or two.. Will I run into steering column/ shift linkage issues?
  5. Y

    How much coolant does my truck take?

    Couldn't find the answer I was looking for how many gallons coolant does my 79 k10 hold fresh engine (350) empty stock radiator
  6. Y

    Wich hei springs to use?

    Got a summit advanced curve kit wich springs should I start with? Has double hump 461 heads comp 268h cam.
  7. Y

    How much oil pressure during priming ?

    How much oil pressure should I have during priming? I can only get it to 20# 10w30 and a cheap gauge .
  8. Y

    What are these holes in my intake?

    Different from my stock 305 intake large front driver side hole? The two holes drivers side next to carb need to be plugged? Same with the one right behind intake in the block..
  9. Y

    What is this part??

    What is this part? Attached to motor mount other side was Attached to nothing..engine is 80-84 305 unknown origin.
  10. Y

    Headers on or off for engine install?

    Headers on or off for engine install? 79 Chevy k10 Chevy 350 full length headers.. Pulled headers off before I pulled motor can I install it with them on or is it a pita?
  11. Y

    Wich oil pan do I need?

    Put my stock oil pan off my 305 onto my new 350 (1974 block) there is no provisions in the block to press in the dipstick tube like the 305 so I'm guessing I need one that pressed into pan? Has anyone run into this problem or no what pan I need? It's going into a 79 k10.
  12. Y

    What intake manifold is best for my truck?

    Have a fresh 350 going in my 79 k10 461 casting heads 64cc combustion chambers 3 angle valve job comp cams 268h full length headers holly 4 barrel(I have an adapter plate) what kind of intake would be best (looking to spend under 200$) I've always liked exelbrock intakes but wich one? Eps...
  13. Y

    Steering column help

    I just picked up a column for my 79 k10 .. This pin in the picture for the column shift is very sloppy .. Anyway to fix this? It's the peice on the column not the pin that's wore out ..sorry forum still letting me post pics!
  14. Y

    Help I.d camshaft

    Need help figuring out what cam I have.. It's s comp cams product I think I no the specs but what lifters do I use with it? I no its not a hydrolic roller cam but other than that I'm not sure..there is 2268h on the end
  15. Y

    Stuck in 4x4!!

    Cannot get my truck out of 4 high! I have no linkage in it I put it in 4x4 with my hand( wich I have done before) and got it out with a small crow bar while rocking truck back and forth with my foot.. I cannot for the life of me get it out!!! Super stuck truck wasn't running have tried while...
  16. Y

    What 3 speed manual came In a square body?

    My local junkyard has large flatbed dually with a 3 speed manual are they worth anything ? Is this something could use if I wZnted to covert to manual?
  17. Y

    Wich oil pump to use?

    Any preferred brands?? Should I go with a high volume or what just came stock?its a 74 350 2 bolt
  18. Y

    Is this a good deal on a set of heads?

    Did not want to overpay..
  19. Y

    Uh o did I just blow my trans??

    Well I was driving my 79 k-10 home from work making a quick stop at the liquor store pulling into a tight spot next to a brand new Chrysler minivan hit a patch of ice lock up my brakes start sliding into the side of the van for some stupid reason in a panic with brakes locked throw my shifter...
  20. Y

    Letters stamped on the underside sbc350 pistons?

    What do these mean? Looks like xj and xg what do these mean I see the rod caps have notches 1-8 but how do I no the rod caps are on the right rod/pistons are the Pistons or rods marked anywhere? It's a 74 350 2 bolt.
  21. Y

    Ignition module problems

    On my fourth ignition module in the last three months I'm not sure why they keep failing ? Distributer rebuilt with all new parts would it help to upgrade to a better one? I noticed my auto parts store has an accel for 50$ my current module is starting to fail it is starting to miss upon startup...
  22. Y

    Steering wheel removal tips/tricks?

    My truck had a hideous aftermarket wheel on it wen I bought it(79) I removed it and replaced it with a slightly different from stock wheel maybe from an 81-87 truck? Installed it thought it was set perfect but it's way off! As in wen front wheel are strait steering wheel is way off ... I got it...
  23. Y

    Botched crank shaft install

    Put a freshly cut crankshaft in my bare block crank will not at all spin or spin freely could this be because I for some reason put oil between the bearing and block?
  24. Y

    Truck only starts in reverse

    Went out today hit the key and nothing! Held the key pulled the shifter down wen I hit reverse it cranks and fires up.. Do I need a neutral safety switch?? Or something else weird going on?
  25. Y

    Can light installation help!

    Bought some cab lights for my k-10 a while back never installed them have no directions they only have one black wire coming out of them is that the power wire? Do the ground themselves with the hardware I'm going to use? Should I run an inline fuse? Then just run them to either a fuse that's...

Latest posts

Forum statistics

Threads
42,102
Posts
909,081
Members
33,585
Latest member
sriddle36
Top