305 Slow Uphill, Dizzy Weights?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

84 k10

Junior Member
Joined
Jun 29, 2018
Posts
11
Reaction score
3
Location
US
First Name
monty
Truck Year
1984
Truck Model
k10 silverado
Engine Size
305
Hey guys, I'm sure you seen my posts on rebuilding this thing but may not recognize all my issues. I've replaced, adjusted almost everything g under the hood but I'm still missing something. ANY RESPECTABLE CHEVY POWER from my 305. It sounds great and drives great on a flat road but any time someone decides to slow down in front of me on an incline I have to wave in the rearview while I let one of the 3 gears catch me up to a decent speed.

Is this just part of having a 305 and 3.08 gears? Do I need to try and find the famed ignitionman weight set for my dizzy?

I'm timed at 12deg and have 18" vacuum. Haven't checked total vacuum or mech afvance yet. Any ideas? Do I actually just need to change heads, weights, gears, engine, etc? What gives?

Sent from my SM-G965U using Tapatalk
Replace the rubber fuel line that goes to the carb. I think they can collapse when the engine gets hot Exspecially under a load, if its a old hose.

Sent from my LGMP260 using Tapatalk
 

maxtwms

Full Access Member
Joined
Jan 29, 2014
Posts
170
Reaction score
33
Location
Alabama
First Name
Max
Truck Year
1985
Truck Model
K10
Engine Size
305
Replace the rubber fuel line that goes to the carb. I think they can collapse when the engine gets hot Exspecially under a load, if its a old hose.

Sent from my LGMP260 using Tapatalk
I replaced that one with a braided line with AN fittings when I rebuilt the carb. I'm running out of excuses why I'm not satisfied, other than lack of knowledge or just being picky/stubborn. I will say the carb is a 650 cfm and may be a little large for the load (305). Working with what I got I suppose.

I guess I'm the kind of person who believes there's efficiency to be gained somewhere with the "larger" components I have and would rather make sure everything is tuned to it's peak before blaming em.

Sent from my SM-G965U using Tapatalk
 

84 k10

Junior Member
Joined
Jun 29, 2018
Posts
11
Reaction score
3
Location
US
First Name
monty
Truck Year
1984
Truck Model
k10 silverado
Engine Size
305
I have a 305 in my 84 k10. I know what you mean. Finally de-smoged, deleted egr. Swaped carb, intake,and air cleaner with edlerbrock. Just finished putting new clutch in yesterday, that was an ass kicker.
Im still undecided weather or not to get a 350 crate motor the 305 only has 123000 miles on it. I just would like the extra hp if i need it.
You must be registered for see images attach
You must be registered for see images attach


Sent from my LGMP260 using Tapatalk
 

maxtwms

Full Access Member
Joined
Jan 29, 2014
Posts
170
Reaction score
33
Location
Alabama
First Name
Max
Truck Year
1985
Truck Model
K10
Engine Size
305
I have a 305 in my 84 k10. I know what you mean. Finally de-smoged, deleted egr. Swaped carb, intake,and air cleaner with edlerbrock. Just finished putting new clutch in yesterday, that was an ass kicker.
Im still undecided weather or not to get a 350 crate motor the 305 only has 123000 miles on it. I just would like the extra hp if i need it.
You must be registered for see images attach
You must be registered for see images attach


Sent from my LGMP260 using Tapatalk
I like that air filter ;-)
You must be registered for see images attach


Sent from my SM-G965U using Tapatalk
 

maxtwms

Full Access Member
Joined
Jan 29, 2014
Posts
170
Reaction score
33
Location
Alabama
First Name
Max
Truck Year
1985
Truck Model
K10
Engine Size
305
Not sure what this is and I may need to move it to transmission forum but that hose with the white zip tie on it by my vacuum can goes into my transmission. You can see it's disconnected.... Where the hell is this supposed to go? Seems like it should be important.

Sent from my SM-G965U using Tapatalk
You must be registered for see images attach
 
Last edited:

maxtwms

Full Access Member
Joined
Jan 29, 2014
Posts
170
Reaction score
33
Location
Alabama
First Name
Max
Truck Year
1985
Truck Model
K10
Engine Size
305
I hate the whole pic doesn't come through but it connects to the steel/aluminum? line that's most forward on the frame

Sent from my SM-G965U using Tapatalk
 

Frankenchevy

Proverbs 16:18
Joined
Jan 3, 2018
Posts
5,904
Reaction score
7,249
Location
USA
First Name
Jeremy
Truck Year
Square
Truck Model
CUCV
Engine Size
Small
Not sure what this is and I may need to move it to transmission forum but that hose with the white zip tie on it by my vacuum can goes into my transmission. You can see it's disconnected.... Where the hell is this supposed to go? Seems like it should be important.

Sent from my SM-G965U using Tapatalk
You must be registered for see images attach

Are you sure you’ve traced it back to the trans? It looks like the front diff breather to me...
 

maxtwms

Full Access Member
Joined
Jan 29, 2014
Posts
170
Reaction score
33
Location
Alabama
First Name
Max
Truck Year
1985
Truck Model
K10
Engine Size
305
Ah, that's what I get for drinking under the truck. Now that I think about it, I'm pretty sure you're right. So it's ok to just lay there like that then?

Sent from my SM-G965U using Tapatalk
 

Frankenchevy

Proverbs 16:18
Joined
Jan 3, 2018
Posts
5,904
Reaction score
7,249
Location
USA
First Name
Jeremy
Truck Year
Square
Truck Model
CUCV
Engine Size
Small
Ah, that's what I get for drinking under the truck. Now that I think about it, I'm pretty sure you're right. So it's ok to just lay there like that then?

Sent from my SM-G965U using Tapatalk

There should be a couple clamps along the way, but yes..it’s fine.
 

84 k10

Junior Member
Joined
Jun 29, 2018
Posts
11
Reaction score
3
Location
US
First Name
monty
Truck Year
1984
Truck Model
k10 silverado
Engine Size
305
Ah, that's what I get for drinking under the truck. Now that I think about it, I'm pretty sure you're right. So it's ok to just lay there like that then?

Sent from my SM-G965U using Tapatalk
Dont ever get under the hood without a cold one near by! Thats just plain crazy!

Sent from my LGMP260 using Tapatalk
 

maxtwms

Full Access Member
Joined
Jan 29, 2014
Posts
170
Reaction score
33
Location
Alabama
First Name
Max
Truck Year
1985
Truck Model
K10
Engine Size
305
By the way... Timing at 8 is $$$$$$$

Sent from my SM-G965U using Tapatalk
 

maxtwms

Full Access Member
Joined
Jan 29, 2014
Posts
170
Reaction score
33
Location
Alabama
First Name
Max
Truck Year
1985
Truck Model
K10
Engine Size
305
Also the push and pull I felt was because I had crappy wires that were too thin and not separated well enough from each other or other metal causing spark jump. Another issue was my dizzy wasn't hooked up to an actual manifold source (holy cow was that an upgrade!) And last off, I used some hemostats to back out my secondary throttle blade screw a touch.

Xpost from other thread of mine. Surprise, everything works in sequence and I'm learning!

Sent from my SM-G965U using Tapatalk
 

Latest posts

Forum statistics

Threads
41,851
Posts
903,507
Members
33,365
Latest member
rossivey
Top