Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Nope or was he trying to get the spindle shaft off the spindle of a 2 wheeler....lol
They have never worked for me on ball joints, even when used with an air chisel.
Sharp whack with a BFH usually does the trick on ball joints.They have never worked for me on ball joints, even when used with an air chisel.
Yup. I like my Plumb pickle fork and some air chisel bits/fork. If the air chisel bit gets stuck, remove it from the chisel and try a different bit opposite to the one stuck. Then beat the Hell out of it with a good hammer. Protect your eyes/teeth.
