Spacing???

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

7

74 Shortbed

Full Access Member
Joined
Aug 12, 2013
Posts
6,306
Reaction score
1,411
Location
*
First Name
*
Truck Year
*
Truck Model
*
Engine Size
*
Maybe maybe not, there was no pressure because the pump wasn't engaged so it couldn't pump fluid, as long as you didn't run it long you may be ok, and as long as the converter wasn't jammed hard against the pump gear, I would slide the tranny back and slide the converter in right and hook it back up and try it got nothing to lose, I did that with my neighbors car and it worked..
 
C

crpntr78

Full Access Member
Joined
Jan 8, 2016
Posts
530
Reaction score
413
Location
Missouri
First Name
Jerry
Truck Year
86
Truck Model
K10
Engine Size
350
Heres a stupid question that begs asking: Did you replace all the tranny fluid and also check to see that transfer case was not in neutral?
 
Ashton84W

Ashton84W

Full Access Member
Joined
Sep 4, 2016
Posts
116
Reaction score
50
Location
Georgia
First Name
Ashton
Truck Year
1985
Truck Model
K10
Engine Size
350
crpntr78 said:
Heres a stupid question that begs asking: Did you replace all the tranny fluid and also check to see that transfer case was not in neutral?
Click to expand...
Haha yes I did but I can see how someone could miss that.
 
Ashton84W

Ashton84W

Full Access Member
Joined
Sep 4, 2016
Posts
116
Reaction score
50
Location
Georgia
First Name
Ashton
Truck Year
1985
Truck Model
K10
Engine Size
350
Well, I've figured it out! Knowing me, I screwed something else up but for now, I found the issue. So there was no pressure what so ever being pumped through the trans. Seemed like there was at first then it just went silent. Well it was the pump. The two little tongs that slide into the little side fittings of the torque converter had gotten eatin up, spit out and stepped on for fun. Got that replaced and upgrade with, I think he said a 13 vein something or another. You tranny guys will know better but hopefully I'll get the trans in tomorrow and go from there. Wish me luck!

You must be registered for see images attach
 
Honky Kong jr

Honky Kong jr

Super Sarcastic Man
Joined
Jun 14, 2016
Posts
14,968
Reaction score
9,789
Location
Denver,PA
First Name
J-me
Truck Year
87
Truck Model
V10
Engine Size
Lil BB 407
Ashton84W said:
Well, I've figured it out! Knowing me, I screwed something else up but for now, I found the issue. So there was no pressure what so ever being pumped through the trans. Seemed like there was at first then it just went silent. Well it was the pump. The two little tongs that slide into the little side fittings of the torque converter had gotten eatin up, spit out and stepped on for fun. Got that replaced and upgrade with, I think he said a 13 vein something or another. You tranny guys will know better but hopefully I'll get the trans in tomorrow and go from there. Wish me luck!

You must be registered for see images attach
Click to expand...
Ouch!!!!
 
7

74 Shortbed

Full Access Member
Joined
Aug 12, 2013
Posts
6,306
Reaction score
1,411
Location
*
First Name
*
Truck Year
*
Truck Model
*
Engine Size
*
That sucks..
 
Ashton84W

Ashton84W

Full Access Member
Joined
Sep 4, 2016
Posts
116
Reaction score
50
Location
Georgia
First Name
Ashton
Truck Year
1985
Truck Model
K10
Engine Size
350
xc_hide_links_from_guests_guests_error_hide_media

So I finally installed the rebuilt trans. The pump gears were replaced and I was told I was good to go. Well I haven't driven it not even a mile and I have this noise coming from the trans, more specifically the torque converter I believe. It only happens when I apply the throttle in gear ( Reverse, OD,D, 2, 1 ) and even then it sometimes does it and sometimes not. No sound in Park and Neutral. Did I screw something else up? To scared to drive it really for fear of permanent damage. I uploaded the video of the sound to YouTube in hopes that one of y'all can point me in the right direction.
 
Ashton84W

Ashton84W

Full Access Member
Joined
Sep 4, 2016
Posts
116
Reaction score
50
Location
Georgia
First Name
Ashton
Truck Year
1985
Truck Model
K10
Engine Size
350
xc_hide_links_from_guests_guests_error_hide_media

So I finally installed the rebuilt trans. The pump gears were replaced and I was told I was good to go. Well I haven't driven it not even a mile and I have this noise coming from the trans, more specifically the torque converter I believe. It only happens when I apply the throttle in gear ( Reverse, OD,D, 2, 1 ) and even then it sometimes does it and sometimes not. No sound in Park and Neutral. Did I screw something else up? To scared to drive it really for fear of permanent damage. I uploaded the video of the sound to YouTube in hopes that one of y'all can point me in the right direction.
 
Ashton84W

Ashton84W

Full Access Member
Joined
Sep 4, 2016
Posts
116
Reaction score
50
Location
Georgia
First Name
Ashton
Truck Year
1985
Truck Model
K10
Engine Size
350
xc_hide_links_from_guests_guests_error_hide_media

So I finally installed the rebuilt trans. The pump gears were replaced and I was told I was good to go. Well I haven't driven it not even a mile and I have this noise coming from the trans, more specifically the torque converter I believe. It only happens when I apply the throttle in gear ( Reverse, OD,D, 2, 1 ) and even then it sometimes does it and sometimes not. No sound in Park and Neutral. Did I screw something else up? To scared to drive it really for fear of permanent damage. I uploaded the video of the sound to YouTube in hopes that one of y'all can point me in the right direction.
 
Ashton84W

Ashton84W

Full Access Member
Joined
Sep 4, 2016
Posts
116
Reaction score
50
Location
Georgia
First Name
Ashton
Truck Year
1985
Truck Model
K10
Engine Size
350
Oh crap, anybody know how to delete a post entirely?
 
You must log in or register to reply here.

Similar threads

Spookee
Electrical Mystery for 700R4?
Replies
4
Views
461
Spookee
Spookee
KeithM
Turbo350 w/shift kit slamming 2nd gear
3 4 5
Replies
68
Views
3K
AuroraGirl
AuroraGirl
NickTransmissions
4L60E Information Thread (Includes 4L65/70/75)
2
Replies
24
Views
1K
NickTransmissions
NickTransmissions
NickTransmissions
  • Sticky
TH400 Information Thread
3 4 5
Replies
67
Views
5K
dragstews
dragstews
M
Need advice
Replies
12
Views
881
calredneck
calredneck

Latest posts

Forum statistics

Threads
42,065
Posts
908,290
Members
33,542
Latest member
willyg
Top