Thanks for the info guys. I am torn. I’ve considered the Vintage Air but I could replace the stock setup 3 times over for the price of the vintage air kit. I’ll just have to weigh my options.
Sent from my iPhone using Tapatalk
So I have had nothing but trouble out of my AC system since I bought my truck a few years ago. I’ve been through a couple compressors, and now the heater core is leaking. I’d like to just take all the old out and replace it all with new parts. Could someone who knows more than me list out...
I’m wondering the same as the OP. I already have the 5” flip kit for the rear. I was going to do spindles until reading of tons of fitment issues with 15” wheels. I’m planning to run 15x8s with 4” backspacing.
I can’t find any 2” spindles, only 2.5-3”. Makes me nervous and wonder if I need...
It's more a thematic direction of the build. Going kind of the shop truck, slightly above rat rod kind of thing. I already need new glass and interior panels. Honestly I need a new wiring harness for the whole truck. I have quite a few electrical gremlins thanks to the previous owner.
Sent...
I'm deciding the direction I was to take my 86 and just wondered how difficult/possible and what all would be involved to switch from the power windows etc to manual roll ups?
Sent from my iPhone using Tapatalk
I've been pleased with mine also. It is spendy but it seems to be very nice quality. I will say I was a tad disappointed the spokes weren't a little closer match to the factory finish of the trim. But it's not a big deal and don't have to worry about glare.
Not to thread hijack but did you...
Got a little antsy on the 3/5 plans with 275s all around so changed to an 18x8 with 255/55s. Hopefully that'll work fine for the 3/5.
Sent from my iPhone using Tapatalk
So I may have jumped the gun a tad but I already ordered a set of 20x8.5 MB Old School wheels and 275/40R20 tires all around. The wheels have roughly 5" backspacing. The truck is stock height for now but I plan to do a 3/5, spindle/flip eventually. Is this going to fit ok or did I just screw...
So I currently have the original rear end on my 86 C10, an open 3.08 (which is whining increasingly louder). I was wondering if say I happened upon a ring/pinion/lsd setup out of a much newer truck/SUV at a salvage yard, could I just swap them over? I'm seeing center chunks out of 02s and...