Look for Cottone Customs on Facebook. He can get you all of the information you need. I would tell you what mine were if I knew. I know tires are 245/45r20 in the front and I believe 275/40r20 in the rear
Sent from my SM-G986U using Tapatalk
I checked the battery cables. They're good. I haven't looked into the neutral safety switch yet. I will look into that.
Sent from my SM-G986U using Tapatalk
I recently started having problems with the ignition. When I try to start the truck, I have no power to the starter or my electric fuel pump. All the lights still work. The battery is good. I replaced the ignition switch and still no power. What else could it be? I'm definitely not a mechanic...
I didn't make brackets. I used the original and put bolts to use like set screws because it's not a perfect fit. I'll try and get pictures when I'm off work.
Sent from my SM-G986U using Tapatalk
Subscribe to project farm on YouTube. He tests several different brands of oils. Out of all tested, Amsoil was the best. As for weight, being high mileage, your bearing clearances could have grown some. Try to get a good oil pressure gauge. If you have low oil pressure, then move up in weight. I...
And you might have to make some brackets. Mine was a little different but with a little thought and about 30 minutes it's in place with no problems. I used the original brackets with a bolt as a set screw to hold it in. I just put a nut on the back side of the bolt so it doesn't move. It works...
I bought a champion 3 row radiator with dual electric fans and shroud. I have a little under 11 to 1 compression and right under 500 HP so the engine does produce a lot of heat. I was a little skeptical at first with champion not being American made but the price was right. I've drove it in 103...