Recent content by swbchevy
-
S
Aftermarket steering wheels
http://www.gmsquarebody.com/forum/attachment.php?attachmentid=33145&stc=1&d=1480307513 Sport wheel for 69 camaro or corvette. Wheel, hub, horn button, and hardware goes for about $199 on ebay or classic chevy suppliers. -
S
retrofit older steering wheel?
The 3 spoke sport wheel for a 69 up camaro/corvette will bolt right up. The whole kit is $199.http://www.gmsquarebody.com/forum/attachment.php?attachmentid=33144&stc=1&d=1480307348 -
S
1981 Jimmy grille options
http://www.gmsquarebody.com/forum/attachment.php?attachmentid=33041&stc=1&d=1479855669- swbchevy
- Post #7
- Forum: Paint and Body
-
S
1981 Jimmy grille options
http://www.gmsquarebody.com/forum/attachment.php?attachmentid=33040&stc=1&d=1479855313 This is the grille currently on the Jimmy.- swbchevy
- Post #6
- Forum: Paint and Body
-
S
1981 Jimmy grille options
I agree, the stock grille needs the correct lights. thanks- swbchevy
- Post #5
- Forum: Paint and Body
-
S
1981 Jimmy grille options
The park lights have already been moved to the core support. The previous owner did that when the aluminum grill was installed. I have changed the headlight bezels(dual lights) to 85 model. I prefer the 85 grille also.- swbchevy
- Post #3
- Forum: Paint and Body
-
S
1981 Jimmy grille options
I have a 1981 Jimmy 2wd, with an aluminum billit grille. What are the options for installing an original style grille? Maybe a 1985 gmc grille? Thanks- swbchevy
- Thread
- Replies: 6
- Forum: Paint and Body
-
S
Parts...Parts...Parts...
Yeah, they put the metric bolt in the standard hole about half way, when it seized up. Then the standard bolt was put in the metric hole where it fell out and was lost. I was able to clean up the threads and found bolts that tighten up in the compressor. It is hard to find good help these days. -
S
Parts...Parts...Parts...
I went to a local swap meet today, and I found the bolts. Thanks for your help. -
S
Parts...Parts...Parts...
That was the original plan, but they never could find any bolts. i have tried several salvage yards, but most of the square body trucks have been crushed. The metric .bolt is the tough one. i am not sure of the thread or length. thanks -
S
Parts...Parts...Parts...
Yeah, plenty of bolts, just not the right length and thread. The shop that changed my compressor could not find bolts that fit. Thanks anyway. -
S
Parts...Parts...Parts...
Two bolts from the rear of an A/C compressor for a 85 C10. One bolt is a 9/16 and the other one is 15mm. The local shop reversed mine, resulting in one lost and the other one stripped. Thanks -
S
Parts...Parts...Parts...
Just the spindles for 1 1/4 rotors. I also need a throttle/kickdown cable bracket for a 1985 silverado c 10. I am looking for the one with a hole for the power brake vacuum line to go through. thanks. -
S
Parts...Parts...Parts...
I need a set of 2wd front stock spindles for a 1981 GMC Jimmy.
