Strick's latest activity
-
Strick reacted to ballencd's post in the thread Help with ignition lock removal - 1984 M1010 with
Like.
Thanks for the info. I almost pulled that but was afraid to do damage. I did watch a video where they just grabbed it with a pair of... -
You've got a good parts store for sure.
-
Strick replied to the thread I need a donut.I've got a student replacing the engine in a 97 C1500. The heater hose connector broke (of course) & I extracted the remains & chased...
-
Strick replied to the thread Help with ignition lock removal - 1984 M1010.Pull the tan/white plastic with the metal contact. Then take a small screwdriver & insert into that cavity. The lock cylinder should...
-
Reading? Books? I suppose you can look at an analog clock and know what time it is too! Kids today...
-
Strick replied to the thread Transfer Case Brace.The strut brace is there to (help) keep the transfer case from breaking the tailshaft from the transmission. In '81 (or so) the...
-
You should not need to pull the starter.
-
no
-
yes, bottom bolt passenger side
-
Doing some work have that bar off. It's an 81 K20 350 V8, 350 auto if the same. Rear holes are slotted, start bolt in slots then tighten...
-
Strick replied to the thread 81 turn signal lens.I've got an '82 K15 and had an '81 K20 Sub. Those parking lights will come out of the bumper and just will get past the bracket by...
-
Strick replied to the thread I need a donut.I went to work in parts over 30 years ago. I knew how to find the industrial and "hard to find" stuff because I was patient enough to...
-
Strick replied to the thread I need a donut.Seems like the Fel-Pro # is 8194. Worth a shot as it fits many SBC apps. HS
-
That’s exactly what it is. Just took all that apart on mine a short time ago.
-
That bracket is for the transmission kick down switch if your truck had a Turbo 400.
