straydog371's latest activity
-
A ‘76 dual tank setup is relatively simple, but you just have to follow the wiring diagram and not try to reengineer it too much. First... -
straydog371 reacted to RanchWelder's post in the thread Anyone use these Littelfuse zcase terminals before? with
Like.
Yah. Marine Rated Battery Fuse. MRBF This is a 600A SkyCraft surplus buss bar, mounted to a slab of mud flap, isolated from the... -
straydog371 replied to the thread Building a bed from new parts- Front panel difference? ETA- Fixed using all AMD panels.I plan to do the same thing as kkgp81...all AMD panels for sure. Summit Racing in Ohio is close enough that making the roadtrip will be...
-
straydog371 reacted to justhorns's post in the thread Building a bed from new parts- Front panel difference? ETA- Fixed using all AMD panels with Like.
I've been to the summit store in Ohio, near youngstown. Great place.
-
straydog371 reacted to TotalyHucked's post in the thread Building a bed from new parts- Front panel difference? ETA- Fixed using all AMD panels with Like.
I work at AMD in R&D and QC. The differences in the '73-84 and '85-up front bed panel are in the way the top rail is shaped and also the...
-
straydog371 reacted to kkgp81's post in the thread Building a bed from new parts- Front panel difference? ETA- Fixed using all AMD panels with Like.
On AMD it list a 73-84 bed front panel and a 85+ front panel. What is the difference between the two? I’m trying to put a bed...
-
Exhaust modification: After driving for a few months now, I decided I needed to add a muffler to the exhaust. I was not happy with the...
-
The stock steel wheels had 1.5" spacers AND bargain tires so I'm sure my ride was suffering a bit. Not sure if the spacers were required...
-
Some plants did "buck build" where the front end is assembled ahead of time and then brought to the line as a unit. It really depended...
-
straydog371 reacted to DoubleDingo's post in the thread Taking off passenger head about 37 bolts so far with Like.
I call it under hood yoga. You'll be posing in various weird poses for hours. It's great. And you usually feel as if a semi truck and...
-
This is all good advice and I appreciate it. I don't post often but I do enjoy following the conversations and questions. Owning this...
-
1- They sit up on those contact patches, you need a small amount of lube on those spots. 2- They just kind of hang there. Nothing you...
-
straydog371 reacted to Ricko1966's post in the thread Do I need a return fuel line with a calibrated 454? with Like.
The return line is a definite benefit,it keeps the fuel constantly circulating,to eliminate vapor lock. GM used return line on...
-
Thanks guys. Just wanted to make sure I wasn’t missing something obvious before punching holes in the firewall. Put two holes in it...
-
I went with coverlay from summit. They had a good deal that came with decent door cards. I filled the cracks and sanded down the high...
