Recent content by shiftpro
-
10 bolt cover
No not the same. The rear is almost a perfect circle. The front is a circle with a flat spot at 12:00 - 2:00.- shiftpro
- Post #3
- Forum: Differential & Driveline
-
Best all-around solvent for engine work?
When I was in Brasil I discovered 99% iso alcohol was water cheap. I bought a gallon like for a few bucks. They also have that purple goop for aluminum... but it leaves a type of stain.. it's from the boat industry. Even though it stains aluminum, we use it on our expensive KTM's engine cases...- shiftpro
- Post #11
- Forum: Tech Discussion
-
Pull 6.2 and 700r4 as a unit?
Why not if the lift is strong enough and you have the headroom? Does the 6.2 weigh more than a big block..? Like I mentioned above with Originalguy if the lift/crane is up to it why not? Even with the rad support in... lift the tail and/or crank the waddaya call it a load balancer. Those...- shiftpro
- Post #4
- Forum: Engine & Performance
-
How many coats of paint?
If you can stand his attitude and foul mouth, he has great 'reality' advice and intruction.. https://www.youtube.com/user/diyautoschool/videos- shiftpro
- Post #7
- Forum: Paint and Body
-
33X12.5X15 Mud Terrain Tires
I would be more concerned with a side knob hooking the rear lip of the (front) fender. 33s are too big unless you only top toe around in the city. Twist even a little and you will hear a new sound. So rubbing metal with for example a. AT tire is bad enough, but mud boots with the lugs are much...- shiftpro
- Post #13
- Forum: Wheels and Tires
-
tire/wheel combo for 2.5inch lift
Yes even 32" will meet metal if you twist it enough (and that doesn't mean a lot of twist).- shiftpro
- Post #9
- Forum: Wheels and Tires
-
tire/wheel combo for 2.5inch lift
Yeah well, mall cruisers.- shiftpro
- Post #8
- Forum: Wheels and Tires
-
Removing old seam sealer
Why not just put more over top the cracked stuff and carry on? Anyway glad to see you did in fact get the cab blasted.. did you find someone closer?- shiftpro
- Post #7
- Forum: Paint and Body
-
Poll: What '70s/'80s pickup would you own if a GM square wasn't an option?
An S10-15 with a V8, 4 barrel and 4 speed.- shiftpro
- Post #5
- Forum: Other Vehicles
-
Interior colors 1979
Not exactly work truck colors but wow, beautiful all the same. And if not a work truck... well what else is a young man going to do in a truck like that? Still have the risk of getting the bench seat stained! Oh memories (hey not mine, unfortunately) -
Canadian shipping
Shipping prices in Canada recently had another increase. I just priced out shipping two VW brake rotors. They fit in an 10x10" x 4" box and on the high side would weigh 25lbs. Distance is 400 Ks. The cheapest shipping through Canada Post is $50.- shiftpro
- Post #4
- Forum: Tech Discussion
-
Canadian shipping
We don't have that choice with most vendors across the line.- shiftpro
- Post #3
- Forum: Tech Discussion
-
Crew cab 4x4 shortbed. Driveshaft question
Why didn't you just move the springs forward, and shackle reverse bracket? Cut the tails off..- shiftpro
- Post #4
- Forum: Differential & Driveline
-
Stance of Two Wheel Drive Square Body
I have used the springs for an AC equipped big block on my SB trucks. Brings the front end up and imo they handle better. Seems the front spring are always too soft (under sprung) while the rear end is over sprung (without a load.
