projectmidnight74's latest activity
-
projectmidnight74 replied to the thread Too low. Need help recovering or leveling..Maybe thats the problem. I went with factory styled shocks and on the rear, were not using that shock extension shackle as we didn't... -
projectmidnight74 replied to the thread Too low. Need help recovering or leveling..Specs on the kit are: 1973-1987 Chevy / GMC C10 Squarebody 5" Front 7" Rear Lowering Kit Description: Included in this kit is our 3"...
-
projectmidnight74 reacted to TotalyHucked's post in the thread Too low. Need help recovering or leveling. with
Like.
What exactly are the specs of the front kit? 2.5" spindle and 2" springs? I've never heard anyone have an issue with the springs coming... -
projectmidnight74 replied to the thread Too low. Need help recovering or leveling..I hope so, I will go by the shop tomorrow and test the turn radius again. But the vertical clearance still bothers me. I cant get my...
-
projectmidnight74 reacted to TotalyHucked's post in the thread Too low. Need help recovering or leveling. with Like.
It's hard to tell. Are those 20x8 or the 20x9.5 versions? I've got 20x8s that are 4.54" and have plenty of clearance to the fender. They...
-
projectmidnight74 reacted to ChuckN's post in the thread Too low. Need help recovering or leveling. with Like.
@projectmidnight74 @TotalyHucked I wonder if the wheel offset is wrong, or too far to the outside?
-
projectmidnight74 replied to the thread Too low. Need help recovering or leveling..I really gotta triple check the turn radius at the current level. worried bout slicing the tire with the outer fender. Will check back...
-
projectmidnight74 replied to the thread Too low. Need help recovering or leveling..Only reason I'm considering is because the top is the tire is almost striking he tub. I can barely get my hand in here..not much travel...
-
projectmidnight74 reacted to TotalyHucked's post in the thread Too low. Need help recovering or leveling. with Like.
Wow, that's a huge difference. My truck sits where yours does currently and I turn just fine. No way I'd wanna raise it up that far...
-
projectmidnight74 reacted to Craig Nedrow's post in the thread New door seals, new problems. with Like.
The last pic looks like the front of the doors, (hinge side) could be in which pushes the back out at a slight angle, which in turn...
-
projectmidnight74 replied to the thread Too low. Need help recovering or leveling..How it sits vs where I need it to sit for full turn and bounce.
-
-
projectmidnight74 posted the thread Too low. Need help recovering or leveling. in Lowered & Street Systems.74 c10. 5/7 drop kit installed..new leaf springs on the rear with the flip kit. Issue is within the front. Springs are not staying...
-
-
projectmidnight74 replied to the thread New door seals, new problems..Update. I feel it's an alignment issue. He's saying its a can corner issue since we replaced the floors and inner and out rockers and...
-
-
projectmidnight74 reacted to PrairieDrifter's post in the thread New door seals, new problems. with Like.
Yep, the missing pex will also let it sit out too far. As well as a striker thats been missing it, it will physically wear down the...
-
projectmidnight74 replied to the thread New door seals, new problems..They say pretty ish after sitting 23 plus years
