Recent content by Paint guy

  1. Paint guy

    TBI issues, please help diagnose...

    Thank you for all the help folks. In the end those of you that guessed Temp Sensor were 100% correct. It didn't make any sense to me, but then again I'm new tp playing with computer controlled vehicles. I prefer something older with a carb that I understand. On my other two vehicles the only...
  2. Paint guy

    TBI issues, please help diagnose...

    I don't take your comments that way. You are probably 100% correct. But here's the thing, I don't have the tools to do as you suggest. I'm a body/paint guy not a mechanic. I just figured that a truck with a very hard 188k on it, that sat for a solid five years before I acquired it was due for...
  3. Paint guy

    TBI issues, please help diagnose...

    To be clear, I didn't mean it was a spark issue, just that it would crank and I could see the injectors were squirting fuel. So today I bought a new ignition module, coil and throttle position sensor. My feeling is that the truck has 188k on it and I'm not sure those things have ever been...
  4. Paint guy

    TBI issues, please help diagnose...

    OK for anyone that has been following my build thread you know I started in October rebuilding an 87 R10 for my daughter as a high school graduation. And while I got the truck done in time, this whole Covid19 thing threw us for a loop in getting it registered and her driving it for graduation...
  5. Paint guy

    3/5 Drop guidance needed

    First off, if you are looking for a 3/5 drop, why would you get 3" spindles and also cut a coil? You will end up with a much deeper drop then 3" up front. Having said that... 1, Those are good choices on spindles and flip kit. 2, I bought Bell Tech drop shocks I found listed on Ebay. 3, Yes I...
  6. Paint guy

    Body work on my '86

    Good for you for taking on the project. Its not rocket science, but it does take skill and patience to do it right. I am a career body man/painter and have done many many restoration projects. Which makes me laugh when people bitch at the costs. I like that you now understand!
  7. Paint guy

    Time to grow GMSB again !!! GMSqaurbody.com on FB

    If I might make a suggestion.... I noticed that the FB group is set to Private. That means that only members can see posts. If the goal is to grow this forum by way of them learning about it on the FB group. Then you may want to make that group public. Otherwise the only people that see it, are...
  8. Paint guy

    Time to grow GMSB again !!! GMSqaurbody.com on FB

    I just submitted the request and answered the questions on the FB group. I like FB for what it is, but I prefer these types of forums.
  9. Paint guy

    When is a cab too-far-gone?

    Personally.... I don't think they are ever too far gone. It's just metal and all of it can be brought back to life. However, It does come to a point where you have to ask yourself why when good rust free cabs are still available at somewhat reasonable prices. Now, if a really rough cab has some...
  10. Paint guy

    Painting inside of bed

    Personally I would prep the bed and do a spray in bed liner. It will hide a lot of sins and is easy to spray. Some of the kits even come with the correct spray gun.
  11. Paint guy

    1981 Stepside fenders

    I'm surprised that no one makes one. It appears LMC has one, but it isn't pictured but there is a listing for it.
  12. Paint guy

    1974 Chevrolet C10 Stepside Build....

    Just getting reacquainted with this thread. Progress looks great!
  13. Paint guy

    Rear spring bushings

    Thanks for that. Kind of what I suspected, was hoping for an acknowledgement of my thinking.
  14. Paint guy

    Rear spring bushings

    I have my truck torn down in a winter redo. While at it I have decided it would be a great time to replace the rear spring bushings. So I go to the local parts store and was given a pair for the forward bushings that are 1.75" and a pair for the rear that are 1.5". Here is my problem, my truck...
  15. Paint guy

    Lower control arms....

    I am in need of control arms for my truck. They are pitted badly having lived in CT all its life. I see there are stock replacement uppers available, but can't seem to find lowers. I have an 87 R10, so two wheel drive control arms. Or am I just not finding what I need, do you know of any...
See more

Latest posts

Forum statistics

Threads
42,249
Posts
912,097
Members
33,749
Latest member
630erik1
Top