P O removed a/c compressor and cut wire connector off wires at compressor. Facing truck it has two wires to compressor terminal. One black one green. When attaching the wires which colored wire should be nearest to driver fender the black or the green.
I could not find a wiring diagram for...
Georgeb
I relize this is a old add but saw also only had 2 responce so took a chance and ask you never know unless you do.
Do you still have the dash pad and the center a/c vents if so what condition are the vents and what price would you want for them?
Hope they are sold but if not I...
Tach in 84 will go appox 2k when first start truck. As truck idles tach will slowley go all the way to peg needle. It will stay fully pegged all the time the engine is running. Has new tach filter and good ground. Any suggestion of problem or need of repair.
Thanks in advance
Jim M
Need help to locate a capicator/filter for a factory tack out of a 79 Blazer.
Does any one know the part number I could use? The harness I got with the tack did not have one, but the wiring diagram shows one in the system. Is it neccessary to have the filter in the system? Will it work without...
Cheap---always good
Simple--even better
Easy----even more better
Works--F-----g fablous
Them dem dar okies do sumtyme do sumphin rite!!!!!
Great post really appreciate the tips I have gotten from the forum members.THANKS
Just got a new guage panel with factory tach---100 mph speedo---small gas guage in lower left section of dash. Going to replace orginal guage pod in 84 c10 with large gas gage and clock in lower left section of dash. Do I have to relocate the pin for the gas guage? I also got the harness for the...
Not to steal the post, but I also have a question about the 4 headlite system. What is the reason/purpose of running relays in the system if all 4 lights come on when on high. My bottom bulbs only has 2 leads going into the bulbs while the top bulbs have 3. I know the 2 lead is for high and the...