NickTransmissions's latest activity
-
NickTransmissions replied to the thread TH400 SWAP HELP.Yep that is a TH400, not a Th475...That said, it may have 6 clutches in the direct drum and 5 in the forward, which was pretty standard... -
NickTransmissions replied to the thread TH400 SWAP HELP.No clue if you need the linkage either but you will know one way or another once you install it. I'd start by swapping the U-shaped...
-
NickTransmissions replied to the thread TH400 Information Thread.Yep, they did or at least the clutch pack config was the same across the Chevy/Pontic vs Olds and HP Buick turbo 400s; many of those VBs...
-
The OW and BB calibration (I wouldn’t be surprised to find Pontiac and Chevy had their own codes for basically the same transmission)...
-
NickTransmissions replied to the thread TH400 Information Thread.Hey Bob - some of the HD and HP TH400s/475s had 6 frictions and steels in the direct clutch along with 5/5 in the forward...Post 73...
-
-
NickTransmissions replied to the thread TH400 Information Thread.Like mentioned above, use blue Loctite and torque to 35-40 ft lbs, though I'd replace those particular bolts with a set from ARP, given...
-
NickTransmissions replied to the thread 700R4 Information Thread.You can convert either style into a 'constant pressure VB' but unless you're drag racing, it's not recommended...Having the VB...
-
NickTransmissions replied to the thread 700r4 speedo port not spinning at all..
-
-
NickTransmissions reacted to squaredeal91's post in the thread 700r4 speedo port not spinning at all. with
Like.
$$ -
NickTransmissions replied to the thread 700r4 speedo port not spinning at all..I was wrong - you do need more than one guess, haha.
-
NickTransmissions replied to the thread 700r4 speedo port not spinning at all..I'll give you three guesses as to why but you'll only need one...
-
NickTransmissions replied to the thread 700r4 speedo port not spinning at all..Yea, the gears available in the aftermarket are color coded but you still need to know what color to buy which means you still need to...
-
NickTransmissions replied to the thread 700R4 Information Thread.80-95 inch lbs is an ideal range, in my own personal experience, for all valve body and aux valve body or rear hold down plate bolts as...
-
NickTransmissions reacted to randomTruckKid's post in the thread 700r4 speedo port not spinning at all. with Like.
It didn't work when we bought it. We will check it out. But thank you. There's alot of goofy stuff going on with the truck. At least it...
-
NickTransmissions replied to the thread 700r4 speedo port not spinning at all..Was your speedo accurate prior to the gear(s) failing? If so, you dont need a website, simply count the teeth on the existing gear then...
