Recent content by Nastardly

  1. Nastardly

    Determining what lift size I have.

    It rides like a brick and I want to swap on the 56" springs while leveling it out at the same time.
  2. Nastardly

    Determining what lift size I have.

    Mine has 5 leafs, so I'm wondering if it had a leaf or two added for lift, which can further complicate things.
  3. Nastardly

    Determining what lift size I have.

    I may have to look for the something on the springs. I have to pull the bed off anyway to weld in new cab corners anyway, so it may be easier to just do that.
  4. Nastardly

    Determining what lift size I have.

    I went to the shop to get my measurements today and the results were confusing. 8.75 front axle to lowest point on bumpstop 3.5 rear axle to lowest point on bumpstop 30.75 Bed floor to ground 74.5 Cab roof to ground They must have either moved the bumpstops or I measured to the wrong point.
  5. Nastardly

    Determining what lift size I have.

    So your truck is lifted and leveled?
  6. Nastardly

    Determining what lift size I have.

    Mine isn't a step aside anymore and it is a half ton shortbed.
  7. Nastardly

    Determining what lift size I have.

    Thank you, 77 K20. This should be very helpful.
  8. Nastardly

    Determining what lift size I have.

    Thank you, I will look over this tonight.
  9. Nastardly

    Determining what lift size I have.

    No blocks, just suspension lift on both axles.
  10. Nastardly

    Determining what lift size I have.

    Thanks for reading my thread. I have a 1975 K10 short bed that was lifted by a previous owner, supposedly it's lifted 3 inches in the front 2 inches in the rear. I want to swap the rear springs to 56" inch springs and level it out. How do I go about determining what lift size I currently have?
  11. Nastardly

    75 K10 distributor issues

    It would still push it away upon the exhaust stroke? Either way, I realized what I did wrong: I had the cap out of rotation by about a quarter of a turn, I adjusted it and re routes all the plug wires, I haven't tried to start it in two days, but now I'm semi afraid I may have damaged the...
  12. Nastardly

    75 K10 distributor issues

    I did have to fool around with the oil pump, I bought a reply long flat head for that, it wasn't as bad as I had thought.
  13. Nastardly

    75 K10 distributor issues

    My cover doesn't have an inidicator.
  14. Nastardly

    75 K10 distributor issues

    Thanks, I will try that this afternoon and report back. There other problem I ran into was that the protruding part of the cap for the electrical connections was hitting my carb breather and filter.
  15. Nastardly

    75 K10 distributor issues

    Where my finger is pointing is where I have the number one spark plug.
See more

Latest posts

Forum statistics

Threads
42,102
Posts
909,081
Members
33,585
Latest member
sriddle36
Top