So like the title says, what information do we have in regards to locating what the suspected reason a vehicle is sagging or leaning to either side. I have seen on other pages and this one to measure from wheel opening to floor, floor to frame and bushing to floor and it will give you an idea of...
So i've done some research on here and cant find a post with my issue. Most issues are a pegged fuel gauge or something similar.
My issue i've run into is my fuel gauge doesn't move at all. I have removed the ground from the tank and no change to the gauge. At one time my fuel gauge did work...
I agree with this, especially since it was a mid 50 degree morning as opposed to a 75-80 degree Texas morning. I spoke with a couple of the guys in my club and it was suggested the hesitation was due to secondary issues. I was told to get a tuning kit and rebuild the carb while im at it. I also...
So this morning while headed to work "Smurf" was feeling quite chipper in this 50 degree Texas morning weather. Got up to 70 no issue, decided why not and went WOT. I noticed upon putting pedal to the metal there was pop/backfire from the exhaust and slight hesitation. It only did it when i went...
http://13252-presscdn-0-94.pagely.netdna-cdn.com/wp-content/uploads/2015/10/IMG_0463-940x636.jpg If you look as this factory grill you can see what i mean where the bowtie is. theres a mold that is supposed to be there that isnt. And as you can see its a sticker, not a mounted bowtie like you...
Thanks, its hard to see your grill behind your hand. there is supposed to be an outline for the bowtie where you would mount it, Originally a foil sticker was in place of where mine is now. Apparently aftermarket doesn't come that way from what i t looks like.
Yes i have one i am going to have my hands on soon. Its already engraved, just needs to be cleaned up and painted. Ill be sure and post on here with my results.
I am wanting get a Dealer engraved bumper like this
I am wanting to know if these bumper will work on out Squares, and if i can use the brackets currently installed or do i have to use different brackets like on the blazers and suburbans.
My current bumper
Thanks
I had the same vibration issue at the same speeds roughly. It ended up being a bad trans mount that was torn to shreds.
Sent from my VS990 using Tapatalk