Recent content by Cuba

  1. Cuba

    What happened to all the S10's

    Mine is still going strong. Just under 200k on the clock. Im not getting it either. Granted, not as strong as the 4.3.... but no complaints. Haven't had to touch anything but maintenance... she's over 35 yrs old!
  2. Cuba

    What happened to all the S10's

    I still have 2 here.... 1 being an s10 blazer. The pickup is my DD. 86, with 2.8... I recently had to overhaul the trans. It was such a pleasure to do, since it was all original. Seals just got tired & hard. It's just under 200k on the clock. Blazer is an 89 4.3, my baby. My mobile truck for...
  3. Cuba

    Headlight issues

    Check pin fitment at the relay. Or the relay itself. To activate a relay, it's minimal current... so fitment could be the only issue... or losing the control signal from the switch.
  4. Cuba

    Squarebody Down! HELP - Member Roadside Assistance Volunteer Map

    You're not a fk up. I've noticed I don't always get notifications or emails for the threads I'm subbed to.
  5. Cuba

    90 Suburban ECM Fuse Popping

    You are awesome for posting an update! Can't thank you enough for that! Even more importantly, you finally resolved your issue. Well done!
  6. Cuba

    Door Spring Replacement

    No... just the hinge. I didn't say remove the door. I just know the door becomes unstable after the hinge is removed. It's nice to have a 2nd pair of hands or a hydraulic jack with towel on top to keep the door steady.
  7. Cuba

    Door Spring Replacement

    Hey my friend! :) bunkering down for more of that white stuff. o_O Yeah, taking the entire hinge out has been the general concensus for this type.. In fact on the bench, in a vice. I recently found a few YT videos on it. Doesn't look too bad, hardest part is banging the new one in place. No...
  8. Cuba

    Door Spring Replacement

    Ohhhh... i didn't realize that was the spring pictured above. I've never encountered that type. My apologies :( I was just thinking of the typical coiled spring.
  9. Cuba

    Door Spring Replacement

    I typically use pry bars to pull them out... a thick rag on top to keep from hitting in the face. Then to install, I've used this other tool... but takes some practice. It's very tight. https://www.amazon.com/Performance-Tool-W84603-Door-Spring/dp/B0187IOXJA
  10. Cuba

    Broke another flexplate, what am I missing?

    Yes... shift kits come with a various springs or even drill bits to adjust the shift. In your shoes, just install a simple TransGo kit to prolong life and lubrication. Keep everything else mid range firmness, if anything. I'll go over that Sk350 kit again to be sure on your specific trans &...
  11. Cuba

    Broke another flexplate, what am I missing?

    I agree with this, because I know builders who have issues. If they are eating the mistakes, even though it costs more upfront due to labor & experience, it's well worth it. Plus, defective parts are more easily replaced under warranty Etc. Then there's the time factor. Most guys have this...
  12. Cuba

    Broke another flexplate, what am I missing?

    Hahaha... no worries. No offense taken here! Believe me. It's not many of us in the field and good at it or enjoy it. Heck, and only 10% of technicians continue to go to training once employed. "They know it all and throw parts at things". I respect your thoughts and commentary throughout this...
  13. Cuba

    Broke another flexplate, what am I missing?

    These are Hiram's links part 1 Part 2 And Gary's link
  14. Cuba

    Broke another flexplate, what am I missing?

    Agreed. They aren't too bad to overhaul. But I've now grown a bit accustomed to a foot press and always had a floor trans jack & 2 ton press. There are tricks to things, removing pistons, etc. Also, there are easy to make 'tools' using long bolts, washers, nuts and all thread rods. I suggest...
  15. Cuba

    Broke another flexplate, what am I missing?

    I agree. I don't like the look of the housing. Im quite sure the bell housing is part of the case, unlike many modern trans which sucks butt. Then you'd have to find another case. No way to really be sure until it's in front of you. Better yet, your trans guy friend. If he's trust worthy, I'd...
See more

Latest posts

Forum statistics

Threads
42,110
Posts
909,354
Members
33,601
Latest member
rumpity_z28
Top