Recent content by Boone83K10

  1. Boone83K10

    Unusual Bumper/Help

    What really gets me is the 4 stainless bolts and nuts right next to all that rust to hold some sort of "brace" that just goes between frame rails and is not even related to bumper nor is not related to anything else!
  2. Boone83K10

    Unusual Bumper/Help

    No, two bumper bolts on top, two on bottom. Yeah rust is a real problem in the mountains of NC, lots of salt during the winter.
  3. Boone83K10

    Unusual Bumper/Help

    83 K10 4x4 I have never seen another truck with this bumper. It almost looks like a van bumper. Well from the pic you can see my predicament. The brackets look nothing like you can buy. There is a bolt through the top and bottom of bracket holding bumper onto bracket. A long brace the runs...
  4. Boone83K10

    Cruise control release switch

    Here is what you need. Part # S749 BWD Cruise Switch at Advance Auto. 22 bucks If yours is the different style (the longer version) then you need the Borg Warner S749 version. It's 49 bucks on Amazon. You can click on those and it will take you to the link.
  5. Boone83K10

    What are these wires for?

    1980 didnt have 700r4 because that came out in 82. So if this wiring is original (and it may have been transplanted, who knows what people have done in these old trucks) then the Jimmy could have had a TH350c. It was like a precursor to the 700r4. It had lockup for 3rd gear. Quick way to tell...
  6. Boone83K10

    What are these wires for?

    White can also be a signal carrier like into brake switch or any switch such as directional indicator or wiper switch or light switch. I got my information from my 83 service manual, 80 jimmy may be slightly different but I doubt it. Wire colors could have changed.
  7. Boone83K10

    What are these wires for?

    the connector inside the red circle. the three wires into the connector and only two wires coming out have to do with the transmission. light green and light blue wires that go out of connector together (2 wires) go to a connector on the transmission and also a low vacuum switch. The light...
  8. Boone83K10

    What are these wires for?

    what cluster do you have? Base? Factory Tach? No Tach? Knowing that will determine what the wires are for.
  9. Boone83K10

    79 Chevrolet tailgate

    where at in NC?
  10. Boone83K10

    ISO Fuel Filler Neck

    good information to know. got any extra ones?
  11. Boone83K10

    ISO Fuel Filler Neck

    I need two fuel filler necks for an 83 K10 longbed fleetside. I believe 82 & 83 were the only years with this style. mine are rusted out and LMC is too rich for my blood. I have paypal ready to send money. I need this style that mounts with 2 bolts behind the fuel door.
  12. Boone83K10

    Add on ac, fenders, doors, rally wheels.

    I wish it was a dual tank bedside. Im right up here in boone.
  13. Boone83K10

    Ball Joint Advice

    I used Mevotech on my entire front axle swap/steering that I did last spring. Love them. I even have Mevotech on my 96 Grand Cherokee rebuild I did. They now have a new Terrain Tough line from Mevotech that looks even better than the Supreme Chassis line that I have used.
  14. Boone83K10

    Factory behind the seat storage.

    Mine may be vinyl too...never paid much attention to it except the gloves, ice scraper and screw driver that is in it. Sent from my SM-G920V using Tapatalk
  15. Boone83K10

    Factory behind the seat storage.

    My truck has that cardboard thing but I also have a leather pocket organizer thing behind my seat. it is screwed into the metal up near the back window. it's pretty neat and I have never seen another one. I can put a pic up if anyone wants to see what it looks like. it looks like a dealer add on...
See more

Latest posts

Forum statistics

Threads
42,140
Posts
910,067
Members
33,642
Latest member
Bhardiman1
Top