Recent content by 88CustomDeluxe
-
383 to 4l80e to np208
Curious about this swap. I have almost everything to complete but I'm not sure about the VSS sensor on the back of the t-case. My trans is an 95 4L80e. Looks exactly the same as the one pictured above. My t-case is a NP205 out of an 88 V30. I have the stock trans adapter which should be fine...- 88CustomDeluxe
- Post #18
- Forum: Transmission & Transfer Case
-
-
88 Custom Deluxe 3+3 Newbie
Thank-you!! I read about this being an issue but haven't looked at the 4wd hangers. My sagging issue is even with a 4-inch block provided with the lift. I'll have to look into getting the 4wd rear/front hangers before I drop the $$ on the ORD shackle kit.- 88CustomDeluxe
- Post #10
- Forum: Introduction
-
88 Custom Deluxe 3+3 Newbie
Derick - Unfortunately I didn't take enough pictures. I'll try and work with what I have and my research and put something together.- 88CustomDeluxe
- Post #9
- Forum: Introduction
-
88 Custom Deluxe 3+3 Newbie
Good Evening! I'm Jason from Central Washington State. I purchased my 88 R20 in Portland Oregon approximately 3 years ago. I've recently decided to start the conversion from a 2wd to 4wd using a 77 Chevrolet K30 drive train that my uncle gave me. It's been 2 months work in progress but I just...- 88CustomDeluxe
- Thread
- Replies: 9
- Forum: Introduction
-
79 k30 steering rebuild
Death Wobble I'm new to this forum but have appreciated all the information so far! I also had this death wobble in my 88 R20 when breaking. I'm in the the process of making it 4wd with a D60 and a 4-inch lift. I'll have all new components on the axle and suspension. Plus a new steering box...- 88CustomDeluxe
- Post #33
- Forum: Suspension, Steering & Brakes
