Recent content by 85 SQ

  1. 85 SQ

    Rear sway bar

    Who's running what for a rear sway bar . I looked at some performance ones . I was curious if any of the squares had a stock one or if there is one from a newer truck that's adaptable.
  2. 85 SQ

    85 c15 fuel delivery issue

    Finally figured out the problem main line from the sending unit was either kinked or collapsed on itself at the sending unit . The 3/8 line was brand new bulk off the shelf at oreilys . It seems way to soft for fuel line though the 5/16 and 1/4 line I have is way more rigid and takes way more...
  3. 85 SQ

    85 c15 fuel delivery issue

    I have completely bypassed all three lines coming from the drivers tank to the valve it still wont pull from the tank I'm about at my wits end I'm going to drop the tank later and check out the lines sending unit etc
  4. 85 SQ

    Horsepower estimate

    Was trying to guesstimate HP for my current setup . 249 HP goodwrench crate 350 . Msd street fire dist , edelbrock 600 cfm carb , performer RPM intake , summit full length ceramic coated headers with purple hornie bolt on header mufflers . . Any estimates as to where that puts me Also where I...
  5. 85 SQ

    85 c15 fuel delivery issue

    I warranted the fuel pump just in case . I put the new one on and test ran from a gas can no issues the pump is working well . When I bought the truck seller said the passenger tank leaked so I've never used it the original selector switch is gone and has been wired up to a toggle . I just never...
  6. 85 SQ

    85 c15 fuel delivery issue

    Fuel tank rusted out replaced with new tank, sending unit and new rubber lines from sending unit to fittings under bed . Drove truck 50 miles the day after no issues . Couple days later truck wont start due to not getting fuel up to filter pull fuel pump ( had a busted spring )replaced with new...
  7. 85 SQ

    Valve job or not

    I posted some pics at the end of this thread
  8. 85 SQ

    Valve job or not

    Pics of a pair of valves and seats . Let me know what you guys think . My sparse knowledge thinks they look pretty good I think at the least though I will disassemble and have the heads hot tanked
  9. 85 SQ

    Valve job or not

    Found them on craigslist drove a little over an hour there to grab them
  10. 85 SQ

    Valve job or not

    Thanks for the info when I have time I will take apart and inspect . I've watched a few videos on lapping the valves seems pretty straight forwardp
  11. 85 SQ

    Valve job or not

    I hunted for them online everyday for a couple months was looking for 041 or 186 to replace the 76cc ones on my goodwrench 350 now I should be able to run a decent cam possibly have to get a stall converter we will see how things work out
  12. 85 SQ

    Valve job or not

    There 041 castings I only played $120 for them
  13. 85 SQ

    Valve job or not

    Thanks for the info I will pull the valves . Be patient with me please as anything to do with valve work is new to me but my mechanical skills are good and I'm working on educating myself thru reading watching videos and asking questions. The pics are what I started with to where I'm at now
  14. 85 SQ

    Valve job or not

    Picked up these heads to replace the ones on my goodwrench 350 . Seller said that had a valve job and new seals installed . Do these look like they still need a valve job or just need to be cleaned up a bit
  15. 85 SQ

    Help with cam selection

    I have a chance to pick up these 041 heads for $120 . Below is the info the seller sent to me. I have the sickly 76cc heads on my goodwrench 350 right now so are these worth buying and putting on They are ready to run, although they do not have hardened...
See more

Latest posts

Forum statistics

Threads
42,357
Posts
914,294
Members
33,860
Latest member
lorisa2u
Top