Interested in this cam set. Curious if anyone has experience with it. My truck is Stock 350 besides header, intake and carb.
https://www.classicindustries.com/product/all-years/chevrolet/truck/parts/222005d.html?gclid=EAIaIQobChMItZu6g-Cz5wIVFqSzCh3gbwQYEAQYASABEgJuTvD_BwE
Thanks for all the information guys. I went with Taylor wires and ran them over the top. I need to get some new wire holders. I don't like what the previous owner had put on. I'll get some pics soon. It runs like a dream after the full tune up and fuel filter replacement.
alright guys I am doing a tune up on my small block. What are good spark plug wires. There are so many options out there. Also I have headers. Who runs them over and who runs them under? I only want to purchase one time and be done. Thanks in advance for any help.
I did go ahead and order one. The one I got came from speedway motors. It had great reviews. You are correct the instructions are garbage. It can with most of teh connectors I need and is the 21 circuit kit. Cost $200. Seems to be a little better than some of the cheaper kits I found. I'm...
There are a bunch of these kits that are almost all the same. Anybody use them with success? I used a similar one on a friends rabbit. It was a totally different situation as it was a stripped down car.
Mophorn 21 Circuit Wiring Harness Kit Long Wires Wiring Harness 21 standard Color Wiring...
Hah. I’m not easily offended it’s all good. I went over everything. I measured all over the place and can’t find where it is. I actually had a thought a few minutes ago that maybe the body is actually sitting lower. Like a smashed mount. I’m checking that tomorrow. Otherwise I’m stumped.
Hi everybody. I lowered my truck a little while ago. 2.5 drop spindles and 1 inch drop springs. Right side is an inch lower. Then springs look to be seated the same. I can’t figure out what is causing it. Any ideas?
I actually was able to get a part number and found some. I actually work at a Cadillac dealership. Our parts guy was working for gm back in the early 80's but our catalog doesn't go back that far. He called a buddy who has an old school parts book and got me the information. I appreciate the...
Hi everybody, I'm at work and trying to get u bolts so I can install my flip kit. I know they are 8" long but I need to know the axle tube diameter and diameter of the threads. Would greatly appreciate some help. Thanks in advance. Truck is a 78 c10
Those look very similar to what I posted. The eBay ones I posted are only $75. I think I'm going to give them a shot. I actually may stay tan now that I'm thinking about it.
Mine are tan. I would like to switch to black. The mechanism work sort of. You have to pull on them a few times in order to get them to retract. They also lock very easily. I did some eBay searching for factory stuff and they were pretty pricey in comparison to these universal ones.