Rear disc brakes on the cheap

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

belowaveragecustoms

Full Access Member
Joined
Sep 14, 2010
Posts
526
Reaction score
45
Location
Oklahoma
First Name
Clayton
Truck Year
1986
Truck Model
c10 short bed 2wd
Engine Size
350
I haven't seen any write ups on this so I thought I would pass some info along to everyone. If you are wanting to put rear disc brakes on your truck this is the cheapest way I have found to do it while using new parts. From 1999-2001 chevy offered the astro in a awd. The front rotors on it just slide over the wheel studs. The bolt pattern on the van is the 5x5. If you go to oreily auto parts you can pick up a new set of these rotors for $35 a piece, the calipers for the van run you $11 a piece and you can pick up a set if caliper brackets off of speedway motors for $11 a piece. Which brings your total to a whopping $114. Which I thought was a hell of a deal when you compare it to a kit from other places that usually start out at around $500. Hope this will be help to some people.
 

Irishman999

Full Access Member
Joined
Jul 30, 2010
Posts
6,989
Reaction score
202
Location
Safford Arizona
First Name
Jason
Truck Year
1985
Truck Model
K-1500 High Sierra
Engine Size
305
Dude, thats awesome. Usually when rear disk break conversions come to mind its at least 1k
 

RetroC10Sport

Supporting Member
Supporting Member
Joined
Sep 29, 2010
Posts
17,076
Reaction score
2,175
Location
Green Bastard Parts Unknown
First Name
Jay
Truck Year
2001
Truck Model
pontiac aztek
Engine Size
3.4
It's going to happen.

What about the master cylinder, proportioning valve and lines?
 

belowaveragecustoms

Full Access Member
Joined
Sep 14, 2010
Posts
526
Reaction score
45
Location
Oklahoma
First Name
Clayton
Truck Year
1986
Truck Model
c10 short bed 2wd
Engine Size
350
Dude, thats awesome. Usually when rear disk break conversions come to mind its at least 1k
I am fixing to start buying all the brake parts for my truck and it is actually cheaper to do this than to put the drum brakes back on it.
 

belowaveragecustoms

Full Access Member
Joined
Sep 14, 2010
Posts
526
Reaction score
45
Location
Oklahoma
First Name
Clayton
Truck Year
1986
Truck Model
c10 short bed 2wd
Engine Size
350
It's going to happen.

What about the master cylinder, proportioning valve and lines?

You can use all your stock parts and be fine, but if you want to put a different proportioning valve on, speedway motors offers a four wheel disc brake valve that is realy cheap.
 

belowaveragecustoms

Full Access Member
Joined
Sep 14, 2010
Posts
526
Reaction score
45
Location
Oklahoma
First Name
Clayton
Truck Year
1986
Truck Model
c10 short bed 2wd
Engine Size
350
I was told that the calipers off the front of the square bodies will work with the astro rotors as well. Which would make it nice so you can use the same pads on the front and back. It would make it alot easier to work on
 

89Suburban

Supporting Member
Supporting Member
Joined
Dec 7, 2010
Posts
24,450
Reaction score
5,604
Location
Southeast PA
First Name
Paw Paw
Truck Year
2007
Truck Model
Chevrolet Tahoe LT
Engine Size
5.3, 4WD
Damn, this is a great tip. Shame us 6 lug 4x4 guys will be left out. :/

Also, what about a parking brake? I think line locks are illegal in my state.
 

Old77

Administrator
Staff member
Admin
Joined
Aug 19, 2010
Posts
28,219
Reaction score
8,588
Location
Kansas City, Mo
First Name
Jacob
Truck Year
1977/1990/1991
Truck Model
C10 longbed/R1500 Burb/R3500 Dually
Engine Size
350/350/454
:popcorn:
 

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
28,956
Reaction score
23,465
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
Damn, this is a great tip. Shame us 6 lug 4x4 guys will be left out. :/

Maybe not. The reason the Astro rotors listed here stop at '01 is because they went to 6 lugs in '02. In theory, this same setup should work with a 4x4 too since the axle housings are the same:)
 

belowaveragecustoms

Full Access Member
Joined
Sep 14, 2010
Posts
526
Reaction score
45
Location
Oklahoma
First Name
Clayton
Truck Year
1986
Truck Model
c10 short bed 2wd
Engine Size
350
Maybe not. The reason the Astro rotors listed here stop at '01 is because they went to 6 lugs in '02. In theory, this same setup should work with a 4x4 too since the axle housings are the same:)

It's not that hard to find the six lug pattern with slip on rotors the problem has been trying to find rotors that would work with the five lug setup. And about the parking brake, if you want a Parking brake setup then go to speedway motors and they offer a rear disc parking brake setup that is still not horribly priced. But as for me I don't give a **** about a parking brake.
 

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
28,956
Reaction score
23,465
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
No e-brake here = no inspection = cop harassment...

Well if our stock front calipers are said to work in place of the Astro calipers, then that means the Eldorado calipers would work too. It wouldn't be a very trusty e-brake, but you could get it working good enough for inspection.
 

Forum statistics

Threads
41,848
Posts
903,422
Members
33,362
Latest member
Dhatch84
Top