Extra parts clean out

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

CSFJ

-----------------
Supporting Member
Joined
Jul 1, 2014
Posts
6,160
Reaction score
5,162
Location
------
First Name
-------------
Truck Year
-------
Truck Model
-------
Engine Size
-------
Time to find new homes for some of the parts that have accumulated in the last couple of years.

First up,

Matched set of axles from a 1987 v20. 119,*** miles, 3.73 gearing
Corp 10 bolt front, 8 lug pattern, Warn premium lockouts, open diff.
14 bolt semi-float rear, 8 lug pattern, open diff.
$250 each, or $400 for the set

NP208 transfercase, 119,*** miles, shifted good, no odd noises. Was attached to a 700r4
Includes shifter.
$75

Both drive shafts, from 350/700r4/np208 application,
$20 each

Dana44 front axle. Older model with external bolts on front hubs, flat top knuckles, 8 lug pattern. 4.10 gearset.
$250

Dana70 HD. 4.10 gear. 1 drum siezed
$100

Prices are negotiable, the more you buy the more negotiable they are. Have some other stuff too, but these are what's most in my way, and at the front of my mind right now. I'd rather sell off here than deal with Craigslist, so you guys get first shot. At some point in the near future, I'll have a set of 8 foot Texas box sides from an eighties vintage dual tank truck.
 

Honky Kong jr

Super Sarcastic Man
Joined
Jun 14, 2016
Posts
14,968
Reaction score
9,789
Location
Denver,PA
First Name
J-me
Truck Year
87
Truck Model
V10
Engine Size
Lil BB 407
Time to find new homes for some of the parts that have accumulated in the last couple of years.

First up,

Matched set of axles from a 1987 v20. 119,*** miles, 3.73 gearing
Corp 10 bolt front, 8 lug pattern, Warn premium lockouts, open diff.
14 bolt semi-float rear, 8 lug pattern, open diff.
$250 each, or $400 for the set

NP208 transfercase, 119,*** miles, shifted good, no odd noises. Was attached to a 700r4
Includes shifter.
$75

Both drive shafts, from 350/700r4/np208 application,
$20 each

Dana44 front axle. Older model with external bolts on front hubs, flat top knuckles, 8 lug pattern. 4.10 gearset.
$250

Dana70 HD. 4.10 gear. 1 drum siezed
$100

Prices are negotiable, the more you buy the more negotiable they are. Have some other stuff too, but these are what's most in my way, and at the front of my mind right now. I'd rather sell off here than deal with Craigslist, so you guys get first shot. At some point in the near future, I'll have a set of 8 foot Texas box sides from an eighties vintage dual tank truck.

You deliver? Flat tops would be nice...
 

CSFJ

-----------------
Supporting Member
Joined
Jul 1, 2014
Posts
6,160
Reaction score
5,162
Location
------
First Name
-------------
Truck Year
-------
Truck Model
-------
Engine Size
-------
lol.



no.

But, I think I found another set of D44 8 lug hubs, spindles and flat top knuckles under a bench in the barn. Were originally for the next upgrade on my jeep when I had it. I need to drag them out and find out exactly whats there. Wipe the crap off them and post them for sale too.
 

Adamds86

Full Access Member
Joined
Apr 24, 2016
Posts
54
Reaction score
5
Location
New York
First Name
Adam
Truck Year
1973
Truck Model
K25
Engine Size
350
Where u located? I'm in the finger lakes (central New York)

Sent from my Pixel using Tapatalk
 

CSFJ

-----------------
Supporting Member
Joined
Jul 1, 2014
Posts
6,160
Reaction score
5,162
Location
------
First Name
-------------
Truck Year
-------
Truck Model
-------
Engine Size
-------
Where u located? I'm in the finger lakes (central New York)

Sent from my Pixel using Tapatalk

About 10 miles east of Flint, Michigan.
 

Adamds86

Full Access Member
Joined
Apr 24, 2016
Posts
54
Reaction score
5
Location
New York
First Name
Adam
Truck Year
1973
Truck Model
K25
Engine Size
350
About 10 miles east of Flint, Michigan.
Damn...that's like a 6 hr drive for me lol

Sent from my Pixel using Tapatalk
 

CSFJ

-----------------
Supporting Member
Joined
Jul 1, 2014
Posts
6,160
Reaction score
5,162
Location
------
First Name
-------------
Truck Year
-------
Truck Model
-------
Engine Size
-------
Lol, that's closer than I figured it would be.
 

Wes

Junior Member
Joined
Apr 14, 2017
Posts
6
Reaction score
0
Location
Apopka, FL
First Name
Wes
Truck Year
1983
Truck Model
K10
Engine Size
305
How feasible would it be to ship the driveshafts? 32703 is my Zip (Florida).
 

CSFJ

-----------------
Supporting Member
Joined
Jul 1, 2014
Posts
6,160
Reaction score
5,162
Location
------
First Name
-------------
Truck Year
-------
Truck Model
-------
Engine Size
-------
How feasible would it be to ship the driveshafts? 32703 is my Zip (Florida).

Not sure. The front would be fairly easy, I would think. The rear, not so sure. Unless ups has changed their oversize rules, I'm thinking it would be longer than their chain they use to gauge the size of the packaging. I'll have to get some measurements, and check tomorrow.
 

CSFJ

-----------------
Supporting Member
Joined
Jul 1, 2014
Posts
6,160
Reaction score
5,162
Location
------
First Name
-------------
Truck Year
-------
Truck Model
-------
Engine Size
-------
Just checked ups, and usps. Guessing the weights somewhere between 20-30 lbs, and the size of the tubes needed to ship them, you'd be in the $80 ballpark on just shipping.
 

nukeme70

Junior Member
Joined
Aug 17, 2015
Posts
2
Reaction score
0
Location
College Station, TX
First Name
Scott
Truck Year
1985
Truck Model
Jimmy
Engine Size
305
Greetings - I'd like to jump in line for the front driveshaft. Shipping would be to 77845.

Thanks,
Scott.
 

CSFJ

-----------------
Supporting Member
Joined
Jul 1, 2014
Posts
6,160
Reaction score
5,162
Location
------
First Name
-------------
Truck Year
-------
Truck Model
-------
Engine Size
-------
I'll try to find a source after work for shipping tubes.
 

CSFJ

-----------------
Supporting Member
Joined
Jul 1, 2014
Posts
6,160
Reaction score
5,162
Location
------
First Name
-------------
Truck Year
-------
Truck Model
-------
Engine Size
-------
Greetings - I'd like to jump in line for the front driveshaft. Shipping would be to 77845.

Thanks,
Scott.

you'd be looking at about $50 dollars shipping on top of the original price.
 

CSFJ

-----------------
Supporting Member
Joined
Jul 1, 2014
Posts
6,160
Reaction score
5,162
Location
------
First Name
-------------
Truck Year
-------
Truck Model
-------
Engine Size
-------
after looking up the shipping costs, I don't think it's realistic to ship the drive shafts. Especially the rear one. If you guys need dimensions or pics of what to look for locally, I can get those, but I gotta believe you can find these closer to home.
 

Forum statistics

Threads
41,858
Posts
903,635
Members
33,371
Latest member
Linemanjl
Top