Brake problem

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

76chevyc20454

Full Access Member
Joined
Apr 16, 2015
Posts
74
Reaction score
2
Location
Indiana
First Name
Justin
Truck Year
1976
Truck Model
c20
Engine Size
454
I have a 76k10 and sometimes when i go to brake the pedal goes fo the floor and the passenger side wheel will lock up.
 

da_raabi

Trailer Park Supervisor
Joined
Aug 7, 2013
Posts
1,403
Reaction score
901
Location
FloriDUH
First Name
Adam
Truck Year
1986
Truck Model
c30
Engine Size
454
Hmm thats interesting. Brake to the floor makes me think master cylinder or a blown line, but the locked wheel makes me thing either stuck caliper or collapsed hose. How old are all your brake components? Are the hoses ancient? When you say pass wheel, do you mean front or back? If back, are they drums?

Need info!
 

76chevyc20454

Full Access Member
Joined
Apr 16, 2015
Posts
74
Reaction score
2
Location
Indiana
First Name
Justin
Truck Year
1976
Truck Model
c20
Engine Size
454
Hmm thats interesting. Brake to the floor makes me think master cylinder or a blown line, but the locked wheel makes me thing either stuck caliper or collapsed hose. How old are all your brake components? Are the hoses ancient? When you say pass wheel, do you mean front or back? If back, are they drums?

Need info!

Front passenger wheel and i just bought the truck so not sure how old it is
 

CSFJ

-----------------
Supporting Member
Joined
Jul 1, 2014
Posts
6,160
Reaction score
5,162
Location
------
First Name
-------------
Truck Year
-------
Truck Model
-------
Engine Size
-------
Is the brake resevoir full? Do any puddles of fluid form if you press the brake pedal in while parked?
 

76chevyc20454

Full Access Member
Joined
Apr 16, 2015
Posts
74
Reaction score
2
Location
Indiana
First Name
Justin
Truck Year
1976
Truck Model
c20
Engine Size
454
No puddles on the ground but i notice its slowling leaking out the cap of the master cylinder.
 

da_raabi

Trailer Park Supervisor
Joined
Aug 7, 2013
Posts
1,403
Reaction score
901
Location
FloriDUH
First Name
Adam
Truck Year
1986
Truck Model
c30
Engine Size
454
If it were me I'd do the following:

1. Replace the calipers if they look original
2. Replace the brake hoses too
3. Since they are cheap, replace the master cylinder
4. Flush the system with new fluid and bleed, bleed, bleed

The only other component that could go wrong at that point is the prop valve, which is unlikely considering your issue is isolated to one wheel

Having good brakes is the most important part of your truck, so for under $100 you can have known-good brakes, at least up front (drums are another story) that you can rely on.

Before you spend any real money, you can try flushing out the old brake fluid and see if that improves anything, but be prepared to spend some money. I'm guessing you either have a collapsed hose or a bad M/C but see what happens with a good flush.
 

chengny

Full Access Member
Joined
Feb 22, 2012
Posts
4,086
Reaction score
1,008
Location
NH
First Name
Jerry
Truck Year
1986
Truck Model
K3500
Engine Size
350/5.7
Put me down for the MC is shot.

Brake fluid can only leak out of the system - it can't leak in. So if there is brake fluid leaking out of the MC cap, it must be migrating from one hydraulic circuit to the other (i.e. front to back or vise-versa). I bet if you pull the cap and check, one reservoir will be full to the rim and the other will be down.
 

Georgeb

Full Access Member
Joined
Apr 30, 2015
Posts
3,259
Reaction score
214
Location
Wisconsin
First Name
George
Truck Year
2003
Truck Model
K10 Burb Z71
Engine Size
5.3
Put me down for the MC is shot.

Brake fluid can only leak out of the system - it can't leak in. So if there is brake fluid leaking out of the MC cap, it must be migrating from one hydraulic circuit to the other (i.e. front to back or vise-versa). I bet if you pull the cap and check, one reservoir will be full to the rim and the other will be down.

I'm with this guy.
 

Latest posts

Forum statistics

Threads
42,065
Posts
908,293
Members
33,542
Latest member
willyg
Top