This is the switch I think is bad. I touched it and it can apart in 2 pieces. Still have to check with a test light or meter. Found it on Rock Auto under switches thanks
Does anyone have a source for the AC Clutch Cycling switch besides LMC? I didn't see it on Rockauto or AutoZone. Or a good part number I can search for?
Thanks
I have no experience with them before. My other tap and die set is an older craftsman. But the HB set recut/cleaned up the 3/4" threads just fine in the lower control arm shaft.
I buggered one of the lower control arm threads getting the old bushing out. So I needed to buy a new tap and die set as mine only went up to 1/2' Harbor Freight to save the day and pocket book. The set seems really well made. If I was needing to use these all the time I'd spend for a name brand...
No budget for tubular control arms on this truck and for as much as I drive this one not needed. It will be a big improvement replacing original worn suspension and gearbox upgrade to quick ratio.
Maybe we'll see. Front suspension on this beast first, oil pan gasket/rear main seal, probably a timing chain and looks like some brake fun too. Oh the joy hope to be done before memorial day.
Here is a great condition tailgate with some surface rust and a few dings on the top edge. Not drilled for trim bezel. $100 picked up in Chesapeake, VA will ship if you want to pay for shipping.
My 1/2ton LB with the HD springs package is 5600 so yours will be alittle heavier. A weight distribution hitch will make it a smoother ride but your truck will have no issue towing them home. Yes you will be close if not/over the 9200 rating but not to worry the truck will handle it fine. Load...
You can send yours out to be serviced by any of the multiple radio refurb outlets. Quick google search will get results. You could have them possibly add bluetooth, RCA's and auto inputs also.
I need to replace the U-bolts when I swap the 6 leaf springs in. What brand are you guys buying? Part#'s. I'm going to ask the spring shop this week for a price too. I tried to remove my original ones to reuse but that's not happening. I'm going to have to cut them off.